The Jalopy Journal
Thanks for all the pix's. You put on a great show, Bob.
Thanks Kev. Stopped in for a beer, a lot of great people their and , awsome cars parked ever where, I think you have my O'le surf board. My first...
Their ins't much room between the block and the frame, tubes ? I'm going try to work a set in my truck hood on. The ram air are fat and the SD...
400 for sure, fendrless headers 700r o.d. and a thin electric fan.
My KC's are marked in side the rim, in your 5 th picture its were your tape measure is at 2" or 5" position. you need to clean the rust off to see...
I have a 55 Pontiac hydro built in the 60's for a gasser in my Panel with a 389 Pont. fun to drive. You can shift it or put in 4th and go shifts...
I was their in the early 60's with the cars and on the bikes in the 70's. The best of life!
I made the same rounds in the mid 60's, that was fun times.
A few weeks ago I ran the 30Panel (not a race car)on at very competent dyno in Camarillo. I was tuning the engine it was crapping out at about...
I need to drive the 69 Judge more often, always turns heads. And of course the Panel truck, the 55 hydro and the 59. 389 can't ask for more fun...
Still playing with my Model A, trying to learn the coil over adjustments/ combination. I seem to lean more towards "C" may be I'll go back to a...
If you prime the oil pump from the distributor remember. Counter clockwise distributor rotation is just one of the many improvements Pontiac made...
I believe this ones for sale. http://www.mafca.com/photos/090925WK.jpg
Is it difficult to get a parking place in the grove on Saturday, thinking about taking the truck up for one of its longer drives just didn't want...
My 30 Panel on cert. scale, Pontiac and a heavy 4 speed hydro 17 gals fuel 127 Lbs, no driver 3060 lbs.
I need a soft shock for my V8 model A, any suggestions I'll take tube or tubeless but not the $400.00 ones. Thanks for the list and spec's, very...
Thanks for all the great shots and what a nice neighbor pleasure talking to you. I'll keep my eye open for a tail light lens. don't want you to...
Been calling all around to find some obsolete shock spec's. This is a great help. Book Marked THANKS
I had a 32 recored at Rick radiator 693 E Arrow Hwy Azusa, CA 91702-5802 - (626) 967-7518.very good job car runs cool. I had been looking for some...
Great engine ran one behind a 55 pont 4 speed hydro in a model A , fast and strong runner, have a tri-power manifold for sale.
Thanks for the information, one of my next projects.
My Panel <style></style>http://i64.photobucket.com/albums/h173/Photofink/Primer%20Nats%202007/IMG_5278.jpg
Could these porblems now be a lack of knowledge or skills? Probably Both
Yogatron, You sell shift kits for these problem childs.
After all this time (1960) and not that many miles my model a Panel truck combo 60 Pontiac 389, 55 Pontiac hydro built for the drags way back...
Thanks for all the great pictures, that is amazing!
One day you will wish you had it !
I have a olds 4 speed race hydro built in the 60's behind a Pontiac I can either shift manually or put it in 4th and it will upshift normally ,...
Thanks Kiwi Great pictures, Fun Show. Mike
On my model A, fire wall mount. I used a swing pedal an early ford master cylinder has worked great since the 60's.
Separate names with a comma.