The Jalopy Journal
I used part of one in a Model A frame from a subframed 46, boxed frame, 37 axles & steer. Link will have pics if it works....
Round back spindles 37-40 square spindles postwar 46-8, postwar also had panhard & sway bar. Look at vanpeltsales site for drawings
A frame had the rear crossmember damaged real bad so I had to make one using the center section. A TT truck spring was used, thicker leaves than...
Howdy cam284 I used & worked on the first Tucker Sno Cats that were based on early Powerwagons, flat sixes, a sure thing to start and run good at...
I scoffed the cushions off the junk couch I had dragged outside to the dump. HD foam carves really good, contact cement from fabric store. Found...
If you want a stock manifold with more CFM the merc used a bigger 4 bolt carb, like a 283 chebby carb. Maybe Canadian Mercury were even aluminum.
I got this one, first picture, no problem with taking them off cleaned up nice, clear engine paint. Several years later, last summer, I am...
Long ago a buddy bought a powerwagon with non working trans. Pulled it apart, everything fried, NAPA had a 100 buck kit, instead the friend Bought...
pm'd a link to my pics flipped banjo
I z'd my frontend the frame height, 4" in front. Put the frontend together with motor & trans hung in place. Remove crossmember & bolt to banjo...
Should be a star on each end, mine has an "A" and a 7didgit number, can date it this way: http://www.mafca.com/data_eng_production.html
There are different levers for them, I suspect longer lever may be for heavier clutch maybe pickup truck. I used the coupler to bellcrank & the...
I used the whole 37 driveline & frontend 3.78 gears. After bare block & case were where they needed to be & rearend mounted where it needed to be...
Lived a year near the peak, took the kids there this fall. My daughter 16 cried when we had to leave, reminds me of promise to move there soon....
Usually did not have that much trouble. Friend took apart a bunch of them, broke some head bolts and his standard practice was to tighten first,...
Also there are more stamped into the frame at the front crossmember. I made a scratching of the numbers off the junk block as it was ledgible. I...
I have a bucket with early motor and would only want an aluminum flywheel. Need low first gear to prevent stalling. I believe a heavy flywheel...
If you split the bones a spring is mounted on it has to be bent. not so much with a narrower A frame, but still... pics of how I had to do mine
I put a drop in my frame and boxing plates inside slightly. This one was my first, but turned out exactly as I wanted. It is a pain in the ass but...
Rustoleum thinned just right so the streaks almost flow out. A wad of ford blue with a little red to try to get that blueish look of faded black...
widened the back ones to 6" for 700's fronts are 600 on 4"
Looks like the same as the 42 cadillac trans i have with a shorter tailshaft sideshift with a bottom cover with that same rounded end
Mine is an A bucket, I used a TT (model T) truck spring in back. Consider a Banjo, I think they have the best look. Made my body longer and deeper...
Tractor Supply
I made em
You can put great things together and the result may not be "tits", but added paint may wash off with thinner and look better, it is still a cool...
Bet it was a chick magnet too. Looks like Mike Imperioli form the Sopranos next to the guy with the tie on, who may be the barber or a soda...
Flashlight Gloves Umbrella Grape tub or some kind of container put your name on it because... Wet cardboard boxes & bushel baskets fall apart...
When I go down to the big road, sign says New York City 400 mi.
Separate names with a comma.
The Jalopy Journal
