The Jalopy Journal
If you go with the electric, can you hide it in front of the radiator? It would a helluva' lot less obtrusive....
Warpage.....Have the flywheel faced when you put the new clutch in.
Can you add another shaft and joint to get away from the plug? Could use a mock up picture here.....
I use two traps about a foot apart and about five feet from the compressor.....Pretty good sized Devilbess (sp?)
I am envious! Been wanting that kind adventure for years.....
It would'nt be too hard to turn your shaft to fit the '46 wheel. Drop me a PM if your'e interested
I've used them with my 302's and 460 with success. A little more spendy? yup. Beats the hell out of doing the job twice though
Setting up your steering and need splines cut on your column shaft? Very reasonable pricing and always a fast turn around. Drop me a PM. Da'...
Ralph, If you'll ship it down, I'll put it on my roadster for a public opinion test. It may take a full year of data gathering though......... Pat
Nice. Have a safe drive.
I use a pressure bleeder and do all four at one time. My the master cylinder is located under the floor. Are you sure that the fronts are adjusted...
That should work....Keep in mind that Ford probably only has about 17 different water pump styles
More than I can ever repay. He's 75 this year, active as all get out and my best friend to boot!
If I got to do it all again, I'd start with a Port a Band
If you can supply the clutch, as noted above, it is about 2 hours on a Bridgeport. Seriously not a big deal to do Pat
Okay. They're great motors and controllers for powering a Bead Roller. I'll get back in the box
Think Bead Roller.......
Rob, That is gorgeous! Some serious vision and craftsmenship! I'm bowing towards Green Bay! Pat
I fab steering shafts on the side. It's a helluva' lot easier to cut splines to match a wheel than trying to find the perfect fit by mixing and...
The little thingie sticking out is the TV. The round pluggy thing nuetral safety switch
Mine runs on the top, exiting the cowl on the drivers side. If it's low, it's probably going to make for some interference with the feet. Pat
Think about a 3/4" spherical rod end kind of support very near the double u-joint. No more fishy floppy
Sounds like the makings of an epic adventure....Sign me up
You must have the drag link hanging out a ways.....Using a Speedway steering arm and a Schroeder Sprint Car box, mine clears the tire by a few...
If ya' need a steering shaft taper turned or splines cut, drop me a PM
I used 351 heads on my 302.....Use the 351 gaskets for the intake and heads. Instead of spending a ton of money on stepped head bolts, use copper...
Clean and simple. Very nice!
Gonna' hafta' be the HAMB hat.......
I'm thinking beehive oil filter.....If your'e gonna' chuck it, let me know what shipping is and I'll take it
The AOD TV cable to a tri power is no big deal. Use the Lokar TV Cable and set it up off the primary carb. Don't waste any time trying to use a...
Separate names with a comma.
The Jalopy Journal
