The Jalopy Journal
Jebeus Christ! I come from a long line of Machinist's and horse thieves.....If you bring 'er home, promise that you will never, ever wear loose...
I've been using Evercoat 416 with great results. Flows great and sands easy too Pat
I use a slide hammer with 3/8 - 16 stud. It's a light press into the block, so it comes out fairly easy. Or you can drive it out with a punch from...
My 2 cents is Double D's and splines. Safe and easy. If you need splines cut, drop me a PM. I work pretty cheap Pat
Kevin, Are you looking for a copy of the plans?
Same as 36-3Window....Wheel Barrow bearings, then I turn a bushing to fit the column. Pat
Try driving through Pacific at 4:00 a.m. on a Saturday. Driving my roadster wearing a hoody and stocking cap. I was on my way to the gym before...
Kirk, Your’e amazing, showing the tact and patience that you have. It’s pretty clear what a couple of boneheads armed with keyboards...
That's a storage stand....Not intended to run an engine on. I take chances on things everyday. I wouldn't try running an engine on something like...
Understood....But the learning adventure is a hell of a lot of fun too...
296 V8, That's pretty much where I'm going....I was hoping for dimensions so I could program and do in one sitting.....Thanks for all the input...
Cause I'm hoping to get the piston and valve locations too.
Fella's My Dad and I are building a 8BA and an 8CM. 3 5/16" bore X 4" stroke...The next step is to pressure check the blocks. Rather than pay for...
500CFM is about perfect for a 305..... Pat
So, I'm starting a trip down nostalgia lane with my Dad...Im 51, hes 74. We're going to build a flatty. It'll finish up at 286", 4 1/8 X 3 5/16....
I've been using a Speedglass for years.....Not cheap, but what are your eyes worth? Pass on that $35 crap. Pat
It's really gone down hill since moving to Elma.....Although the drive from Puyallup through Yelm and Rochester was fantastic, Pat
Consider a 7X12.....A little bit bigger, but a bunch more torque too
If you need to cut splines, drop me a PM. I work fairly cheap Pat
It could be almost anything...If your'e trying to adapt, shouldn't be a problem. If ya' need splines cut, drop me a PM Pat
Any oil, grease, PAM. Something a little oily......
Is there a HAMB gathering slated for the swap meet this weekend? Pat
Um, I don't think it was your leg getting pulled....By the way, the coeffiecnt of expansion for stainlees varies between .00008 & .000096 per...
Need steering wheel splines cut? Piece of cake. Send me a P.M. Pat
The gauge is a spacer that fits on the TV cable..... .275 long, 30 to 35 psi at idle in neutral
"wears the costume" ????? costumes are for children and only on Halloween rodders don't wear costumes...I've been at this for almost 50 years...
Oh Hell yes! It's just a car. My friends are priceless!
Prep the area to be louvered for paint....kind of a bitch to work the area between the louvers afterward
When it quit being fun, I bagged out. Lot's of really good guy's. Couple of cliquish asshole though.
Try and get something that will run 110/220....220v cuts faster and thicker... Pat
Separate names with a comma.
The Jalopy Journal
