The Jalopy Journal
1975 Dodge pickup trucks had a cable operated heater control valve. Works to regulate the flow and temperature and shut off the coolant to the...
I always heard 15 HP.
Or you could ditch the engine plate and build a crossmember to support the rear of the transmission like it was in a car with a rubber mount.
I tried one for my chopped Buick. Didn't work very well so I removed it, which was easy as it was held on by a magnet. :D
Tahoe?
Very impressive!!!!!!
The 3 holes around the center hole in the reflector is for a special bulb that has the 3 lugs that fit the reflector. Try polishing the reflector...
Thanks, didn't see them till you brought it to my attention.
That ought to be fun keeping a flathead cool with that small grill opening.
Those are U joints under the rubber boots.
ANSWER TO THE LAKE PIPE MUFFLER QUESTION I didn't know there was a lake pipe muffler question. Learn something every day.
Where are you located? We have a parts car at work that we took a good transmission out of. I bet the clutch is good also.
If you are working on a Buick engine, it’s a nailhead not a y block. All y blocks have adjustable rockers. You should change your title if a Buick.
There is a reason all the car makers went to 12 volts with high compression V8 engines. GM V8's in 53, Pontiac and Chev in 55, Ford in 56.
If you get one of those old fashioned electric soldering irons you can solder a gas tank with gas in it, as long as the gas is below where you are...
They only give them to special people.
Fire and hay bales ....... what could go wrong?
It's 15 INCH Lbs........ not 15 lbs.
Keep looking over your shoulder, the mob will find you, and get you eventually. :eek::p:D
Clean both ends of your battery cables, and the cable going to the starter. Clean and sand them even if they look good. Clean the ground strap on...
A friend had a 37 Buick street rod with 4 wheel drum brakes. It never stopped great, so he put on a disc brake kit on the front. Now it would...
Where did you get the resistors and what value are they?
Life will be way easier if you convert it to 12 volts now. Or you will do it later.
We didn't have bumper to bumper freeways going 75 MPH at all times of the day.
That is all wonderful news, about your wife, and the roadster both. Now go enjoy them both! :)
I had 2 peep mirrors on my chopped 49 Buick. The drivers side I kept, took off the passenger side as I could not adjust it to see where I needed...
I think if you message one of the moderators they can change it for you.
I don't think I would respond to someone with RATROD in their name.
Or put a plate under one of the carbs that has a vacuum port on it. Those plates came in the South Wind heater kits for Fords.
Looks like they were cast in a high school metals class in the 50's. Fins added to real Riley parts and used as a mould to cast those. We made...
Separate names with a comma.
The Jalopy Journal
