The Jalopy Journal
As long as the drum registers on the center hole of the hub it should work fine.
We may need to change the title of this thread to "The J Hansen Thread". :p:D
Just to be clear, the vacuum advance is separate from the mechanical advance. With the vacuum line disconnected you should still see the timing...
I have found that if you can find a same year GM car that the rear window motors are usually in good shape.
Have you tried back flushing the engine block? Big block Cads usually run cool. I wonder if some of the coolant passages are partially plugged.
Well it was just camera angle or view that made the engine look tilted then. Scratch that idea.
Don't modern cars also have a switch in the seat to tell when to turn on the buzzer? So it doesn't go off on the passenger side when no one is in...
Is it possible that the angle of the engine is causing it to overheat? Maybe the water is not circulating correctly with the back of the engine...
[ATTACH] What Squirrel said. What I did was find a small volt gauge and replaced the amp gauge with the volt gauge, keeping the factory face. So...
Sorry to say but.... Put the engine in correctly so it is lower than the radiator, and you can run an engine driven fan with a fan shroud. Also...
The mosquito is our state bird.:eek:
Must have sat outside for a long time to get that rusty.
Do you have any animals in your moat? Sharks, alligators etc? :p
As a new guy to this type of transmission, can someone explain all the shift levers and how it works?
Get well soon HRP!
Billy, do you live in a castle? First picture looks like it. When the 442 first came out, the local dealers ads said 4 bbl carb, 4 speed, and...
8675309 ask for Jenny.
Vintage Air. Do it once and done.
About half of the cars that are there Friday and Saturday do not show up on Sunday. It has always been that way. I think those people came from a...
I saw the Didia 150 at a car show in Minneapolis when I was a kid. I think it was at the Minneapolis Armory and may have been a Ray Farner show....
I had an Olds powered 34 Ford back in the late 60's that someone had put a Vair front end in. It understeered something awful. If you went...
Why?
Finally met up with @jakesbackyard. Had a good conversation and made a new friend, Also @Crocodile stopped by and said hi, saw him there last...
I was there today, lots of cars and people. It was cloudy off and on most of the day with a good breeze. The quality of the cars keeps getting...
I was there. And will be there tomorrow and for the swap meet Sunday.
Isn't there a threaded hole or head bolt in line with the holes in the covers?
I see Doug made it with his Edsel. Should be a good turnout with all the BTT50's cars in town.
Yup, it's the hose.
Drove by the fair grounds around 3pm today. Camp ground already had a dozen or more cars in it.
Bigger wheel cylinders will make the pedal easier to push, but with more travel. Also better braking.
Separate names with a comma.
The Jalopy Journal
