The Jalopy Journal
Very nice car, I was just playing with a visor on my 37 Lincoln and it looks the part, not sure about roof racks, looks elegant just like it is...
So you have a 40 truck column on a 36 box and shaft is how I read it, different years were different lengths in the shaft and especially and most...
Thinking about the trunk hinge, have you had a look at a Woody, we had one here recently and it had a piano hinge right across so it opened flat....
Have u thought about a screen off a 55 Chevy, nice shape and curves around to the start of the door Sent from my VFD 710 using The H.A.M.B....
Have a look at a fordson tractor fuel tank might fit in there nicely Sent from my VFD 710 using The H.A.M.B. mobile app
That's an interesting custom trim on the bonnet, almost looks like it should be there, did it have any other custom modifications
Great days entertainment and aweso.e racing, loved the flag start section and the wheelstands, thanks to all who organised a great event
It would seem your chassis is 1938 or earlier most likely 35/6, from 1939 the front cross member was raised about 1/2 " higher where engine mounts...
instead of making the standard old bench for my folder, thought I'd have a bit of fun with it[ATTACH] [ATTACH] used my trusty plasma and hand cut...
post 24 is one I made to bend 1/8" plate, works great for thinner metal also, used a 7/8" pin as the hinge on each end and the base and bender...
[ATTACH]
On my shearing grinder, I normally just buy a yellow glue from the rural supply depot, works fine on normal sanding paper , just need to clean the...
on your brake questions, I think the 55 pontiac had a similar or same under floor master cylinder and pedal setup as a 55 chevy pickup and 59 gmc...
if you need to adjust the length of spring just remember as a rule of thumb what you cut off the spring is roughly twice off the drop out on the...
years ago we used to use a rubber glue for making O-rings for a special size in tooling, used to get it from a bearing specialist in otahuhu who...
if it is the 3/4" pin that carries both pedals and pushes thru the casting, then yes it presses out, it is firm but not normally overtight, a...
Hi Kwilli55, beater40 from New Zealand here, I am interested in your 39 coupe, I have a friend in Shamokin Pa., just up the road from you who...
Ok, had my moonshine and the more I read this the harder it gets, been thinking how the engine mount location of Tannergang's works. In a chassis...
Hi Kenneth, great work youre doing there, you mentioned on Kippers thread about a winder for the front window and a lincoln dash, 35-38 fords,...
Inspirational build, gives me the confidence to have a go with my rusty 37 4door, looking at your pics you still have bracing inside but was there...
[ATTACH] [ATTACH] hi Jake, this is all I have, 11" dia, take a 1 3/4 or 2" shoe, depth from centre hole to back of drum about 3 1/2", one has...
with the fad of gassers, lift the front a couple inches, set of slicks on the back and youre doin it
the Janola bleach is just a household chlorine bleach, will try take a couple before and after pics of the dipping
the westcott drawing will show you the different dimensions, mainl just bolt holes, the frames are the same and interchangable, main difference is...
thats 3-4 25kg bags to 1000 litres, or if you want a small sample, about a kg to 20litres is handy in the shed. I had a tank sprung a leak, cause...
I use this citric acid, 4 bags 25kg to 1000 litres, have had the same mix for over a year and cleaned a lot of panels, starting to fade now and...
Steve woodfine ex Rusty Acres in nelson was looking for sections to raise his 3w back to stock height, dont know if he found the bits but the car...
[ATTACH] had to work for its living even on the day I bought it home, regret selling it now[ATTACH]
36 corvette hardtop
I've been thinking of front mounting a small rootes style blower on the front of my 59A flatmotor, for a drive I have been considering...
Separate names with a comma.