The Jalopy Journal
You could also do a mutt involving a 283 crank, imagine the rpms that'd pull. Pistons aint gunna be cheap, but a while back speedway clearanced a...
My l79 cammed 327 10.4 to 1 compression iron head daily runs fine on 92 octane, so that's something to add to the debate, similar specs on a 400...
Get access to a large lathe and a tig and make your own, I remember someone doing that on here a bunch of years ago
Well cracked 100 for the 1st time with my new full traditional engine and trans combo in my 1965 daily, this morning, still climbing like a sob......
Vacation is only a sick day away, besides, priorities! I consider that no matter how much time and a half i make, i always make out better money...
Did Michael J Fox pinstripe that dash rail?
Someone on here was rocking a AA front axle on something, If I remember right they drilled the holy shit out of it and the bones, and also...
A real man would chrome it!!
The race between my income tax refund and the swap meet is gunna be close!
If you go new style holley, I'd personally go with a vintage style rebuilt one. You can get one with the right steel linkage stuff, and early...
Nope, I have heard of 4 banger guys running 8 cylinder caps, and I'd assume with some modification the 8 cylinder biscut would fit in a 4 banger...
I'm running Packard 440 from brillman in my daily, seems great so far, any 7mm works good. These are a pain in the ass to setup
I'm trying to find an adapter for a 331 hemi, but my hydro isn't stock, the coupler probably only has 1/4" of fins!!!
And most of these failures are radials..... I personally run them until I see the second layer of cord
I'm gunna sat the nose was stored separate probably 1/2 submerged, especially the condition of the grill makes that look unnatural as hell
Run a sheet metal screw into them and claw hammer them out, or drive them out from the back side
I'm interested too, only I need about a 1/4" diameter SS hoop and I'm not doing a banjo, instead I want to fill around the hoop with clear plastic...
Find me a place that sells the brass mallory condensers and i'm in!!
I'm running a resisted coil, 3.4ohms, i'm starting to think points isnt my problem
If i can charge up a condenser and it holds a charge is it good? Or are there other things that can be bad, as in bad enough to toast points? I...
I saw a set of chrome 392 heads at a local swap meet pretty cheap 5 or so years ago.... Kinda kicking myself now. As for price, the reason i...
There is nothing inherently unreliable about any other post 1950 american engine other than poor maintenance. Get something different, or atleast...
I dont know, i have an allen machine, and i swear the the manual mentions testing OD solenoids i never looked into it. I simply saw it while...
A distributor machine can test these, outside of old car circles good luck finding someone with one though
I just took a long nut, threw it in the spindle of my mill and a reground chunk of old broken drill bit in the vise and used it as a lathe to turn...
I mean intake ground as exhaust, and exhaust ground as intake. People have called it that in the past on here so I used that term
i have a wierd urge.... Take a motor with a reverse ground cam, so it breathes out the intake, and in thru the exhaust ports, and sandwich it...
For anouther update, i broke it in today and put about 30 miles on it. It runs like a top, pulls like a SOB from speed and that M22 howl is...
I'm still trying to find some M-3 trim for my '51 p/u, I already have a sweet 3/4 ton tailgate
Why not throw a car show in the work parking lot every day?? I mean I can make posters! Am I the only one with only liability?
Separate names with a comma.
The Jalopy Journal
