The Jalopy Journal
Richard; This website (unfortunately) does not have the answer to your question, but it DOES have lots of links to engine-swap info:...
Don't know if any of this stuff will work on a nailhead, but I junked a '69 Buick 350 block last summer with a whole set of OEM cast aluminum...
No posts from me in awhile - but you are gonna LOVE this one: DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar...
Another "Thumbs-Up" for Pertronix! Running one in Accel buleprint dist. on my '67 Nova 283 for several years and it is great - I don't miss...
I also am running a 600CFM Edelbrock Performer w/ electric choke on 283/PG in my '67 Nova 4-door. (Edelbrock Performer Intake too!) It works...
The scan of the ad for all those "Car Club Plaques" as well as a few others can be seen at: http://mrmap.freeservers.com/custom2.html More to...
Rare decals on E-Bay? Woulda thunk they would be worth $? I just found a stack of decals I got from "Tubular Automotive" of Weymouth, MA...
Here's the ad where I got my avatar - I will scan and share some more later! [img]
My big expenditure for last weekend was a 1965 edition of a popular Mail-Order parts catalog that I picked-up for 70 cents! It has a lot of the...
Several years ago I had the stock 283 from my '67 Nova rebuilt - it got .060 o'bore and crank clean-up, and hardened valve-seats but all the parts...
Just posted a reply to the guy with '48 Chevy and no key for trunk - it made me think of a note I posted to Classic Chevy forum a few years back:...
:eek: If you have a bunch of old Briggs-and-stratton keys try 'em before you crawl-into the trunk! They did not use a whole lot of different...
I used a '55 Truck bell-housing and clutch with late model ('69?) Chevy Truck 3-speed in my '55 with 235. The starter had to be custom-made since...
I had recent advice from a retired NYC cop on "Chevytalk" site that, if you have a bill of sale and a picture of the VIN, you can register in New...
I also think it is real nice of you to offer to do this! I wish I had a graphic for this but I don't: My older brother was a hot rodder back...
The bendix mech. KATFISH is talking 'bout is the linkage from solenoid plunger to the flywheel gear shaft, the gear, and the shaft itself that the...
Excellent pictures - looks like a real great get-together! Your car is pure stealth - no wonder nobody noticed it, it is not a "cartoon" car...
Oh, yeah, the posts they used on some of those roadsigns are sweet! I've got a couple around somewhere - real high quality steel, like them...
I love it! I went through a "Kelvinator Phase" where I made all my floorboards out of Kelvinator washer and dryer covers - in fact my '55 Chevy...
Back in the late sixties my younger brother put a '57 312 in a early Falcon 2-door. The Y-block was so heavy the front springs were coil-on-coil,...
I can tell you that what you describe in re to liquids "creeping" in small gaps is correct - I believe the scientific term for liquids that have...
Hi, Rusty! I exchanged PMs with a retired NYC cop on chevytalk website on this subject and got pretty much the same answer you got from DMV. I...
Hey, Chop! I like the quote from Steppenwolf in your signature! :D
OK, my first shot without reading any of the previous posts (honest!): Had vacuum advance connected to wrong port on carb? I had this problem...
What kinda hemi, 50's or 426 "late model"? Bet the Ford "purists" hate that! That's "hot rodding" - told ya I knew what it meant!
Hi, Olli! The Citroen is way cool! Believe it or not I know something about them - 2CV stands for "2 Chevault" or "2 horses", right? I spent a...
I have top for a '55 Chevy 2-door sedan that I cut-off a car with little else good remaining. During this tornado and hurricane season somebody's...
Separate names with a comma.
The Jalopy Journal
