The Jalopy Journal
If i take the wires off of the socket and hold them to the buld on the drivers side (working side) the bolb lights. If i do the same to the...
Well im not sure if the brake light is working, but i dont think it is (just went through all the brakes and car has been off the road for...
Well i put a test light on the ground wire of the light that's bad, and on the positive of the one that's good and no light. I also switched the...
Does anyone have any advice in chasing a bad ground in a taillight? The car is a 1953 Pontiac chieftain. I was thinking the turnsignal unit in...
305s had 58cc heads so compression is probably higher than stock
Hi Everyone, need some quick help. I took my master cylinder off a few weeks ago, and now i'm putting it back on, and I can't remember if the...
Does this Kit work with the factory master?
This would be good to know. I don't think anyone even makes drums for these cars anymore. I called kanter and PRP and neither have drums. What are...
Yeah, the B52 bearings are up to $100 Each. With this kit you get all your front bearings and wheel seals for for 95. Not to mention I think the...
FYI- I got this kit and am very happy with it. -Chris
Dose anyone know the cross number from a B52 (ball wheel bearing) to a tapered roller bearing? I know they are out there, but I'm having trouble...
Here is a description of the pickup conversion kit. http://www.dreamershotrods.com/cpp-4759rbk-u.aspx
Thanks for all the info this gives me much more to work with. Rockauto is a cool site, If you click the part numer if gives other cars that use...
I'm looking for some input on new wheel bearings for my 53 Pontiac. Ive been to bearings places, and they tell me to go to the auto parts store....
Here is some information on the product: http://64.90.169.191/applications/automotive/brake.html do they sell this stuff with pre flares and...
This is great news, I was dreading the idea of doing new brake lines on my car; however they need to be done. -Chris
Has anyone used this stuff since the post was created? Is it good stuff? Do you feel comfortable enough to use it with a single master? -Chris
Nope, I've never worked with this kind of suspension. This is the info i was looking for. Whats a good way of doing this in my garage without...
Hi, I'm replacaing the lower/inner bushigns on my front control arms, and wanted to make sure i do this right. These are the metal on metal...
You all should check out www.1952pontiac.com its a great source of info for 49-54 pontiacs, and there is a forum which i see as a good place to...
welcome
welcome from pa
nice project welcome
I've been trying to research this on the HAMB, and i've not found too much information specific to pontiac so i started looking into the chevy...
No one upgraded to a dual master cylinder here?
Thanks coldwar, these numbers are much appreciated! -Chris
advanced auto provides part #WC14494 but they are 50 bucks each.
Awesome, that's what i was hoping. Anyone got any part numbers? The conversation with my NAPA ends with "1953." "Excuse me sir did you say 1953"
Does anyone know if there are any wheel Cylinders that an auto parts store might have, that i can swap in on my 1953 Pontiac Chieftian? Thanks!...
Anyone on the MC Question?
Separate names with a comma.
The Jalopy Journal
