The Jalopy Journal
Looks like the S-10 spring would be a better choice. The Aerostar spring will be to much drop, the tires will be rubbing the fenders when turning.
http://www.jalopyjournal.com/forum/showthread.php?t=692390&highlight=lowering+galaxie Good discussion about this on this thread.
Here are a couple of pictures I took yesterday. Very cool place to visit if you get the chance.
You'll probably have to modify the speaker grill to sit down into the dash. It has little tabs to raise it up flush with the padding.
Bringing this back from the dead. Do any of you guys have the application form number to register an antique vehicle? An on line search turns up...
I bought a pair of seats at Carlisle that look like yours. Hard to tell if they are exact with out more detailed pictures. I was told they were...
I need a 1940 standard or 1941 pickup gauge panel, original throttle pedal assembly, F-1 front brake drums, anything 40-41 Ford pickup.
Looks like a 1965 Comet Caliente Wheel
Tech on banjo rebuild in the tech archives
Thank You, to all the veterans and their family's past and present for the sacrifices you make for this great country
Cyanide was a factory B/FX car. The owner/driver was John Faithful.
check this out: http://www.webrodder.com/article.php?AID=26&SID=16&CID=7
1962 Galaxie with a 292 and auto trans had a 3.00 rear gear
If I remember correctly, pulling back on the drivers inside handle locked the door.
Nice progress pictures. What are the clutch master & slave cylinders from orginally? Did you have to cut the tunnel to get that Tremac in there?
I have a pickup that has the complete X member cut out of the stock frame. The X member was burnt off about 2" from the side rails. I'm going to...
Been lurking here for a few months and figured I better play by the rules and do my intro. As a youngster I was a Chevy guy, as an old man I'm a...
HotRodFreak, How much did to take off the top?
HotRodFreak, Sweet ride, How much did you take off the top?
Separate names with a comma.