The Jalopy Journal
Nat. Chevy Assoc. has all kinds of used parts.
I talked to Paul, from Nat. Chev, a few years ago at Iola. They had the 1 piece bumpers at that time, and they looked like a good quality product....
I used the MP kit on my '54, and fabricated a master cylinder mount/ pedal bracket to use the 'vette cylinder. I like the MP kit because it's...
One other thing that I forgot to mention. With the MP kit, they have you knock out the inner bearing and race, and install the A-13 set with the...
In the MP kit, no. You do have to "polish" the spindle with emery cloth, to get the spacer to fit on.
Ok, here's what I've got on mine. The kit uses '70-'77 Camaro/ Firebird, '73 Cutlass, Chevelle, GTO rotors. The inner bearing is # PT A-13. The...
I just did the MP disc swap on my '54 last spring. I made sure I wrote all of the bearing and seal part numbers down for future reference. Give me...
I tried it ten times. My best- .072, my worst- .505:eek: .
www.killbillet.com Saw the link, and what can I say, curiosity got the best of me. WTF! Just goes to show that you can find anything on the internet.
Nice looking rag. Te layout is cool, and the pictures are excellent. Keep it up!
I love it. My personal preference on the wheels would be gloss black, but that's just me. Finish up the paint, and drive the piss out of it.
Kool!
I was at an open house for one of our parts suppliers last fall. They had a couple guys there from Comp Cams. They recommended Rotella.
Great job. I'm usually not into elaborate striping, but that is beautiful.
I'm not certain, but you may be able to just use a stock early SB bellhousing.
Residual valves should make no difference in your pedal "feel". If you don't have any pedal at all, that's not your problem. Not a bad idea to add...
Separate names with a comma.
The Jalopy Journal
