The Jalopy Journal
Maybe Ryan should make an off topic board for everyone to circle jerk about off topic stuff
Sad...but this belongs on facebook, not the hamb
Saltys got it right. You might have to spec out exactly what you want and give those directions to the local shop. Where is all the bags are for...
I like comp cams...if you are looking for easy street go hydraulic and avoid the constant lash adjustment. On high lift cams roller is best. Talk...
Mocking up the 40 rearend for placement. [IMG] Sexy boys making sexy toys! Looks like a nice soapbox ccandidate there in the background. Nice...
Awesome...the bottom of my A sedan is bout that bad. Right now Im focused on makin the rest of the car real solid then some day get to all the...
I got one them ultra rare 8 or 9 window Model A's...itll get patched sooner or later ;)
[IMG] Didn't notice this till I put the pan on, was hoping someone here knew why the block overhangs so I don't have to drop the pan and try to...
I would double check your timing marks to make sure they are lined up properly too
Those look SIIIICK!!!
this would be for just street use he said it helped alot with cooling which is something im always interested in being in phoenix. definatley dont...
cool
Heard from a buddy this weekend that if you take your pistons and chuck them up in a lathe and add a few grooves down below oil ring on the skirts...
anyone out there ever done somethin like this?
mmmmk, got a wide truck 9inch...35 wires dont fit over the drums...dont want to run spacers cause the rear end is already wide enough...would like...
a 7018 is a nice rod to use real easy to control and such...I think the most common thing used is a wire feeder though since they are easy to use...
Rusty Tromboners cc
Youll need some brake line, one of them little tubing cutters that you twist around the line to get a nice perpendicular cut, and a 45 degree...
for a caliper like that you read the inch and tenth of an inch straight off the slide, then add what is shown on the dial
401 Nailhead in the A tudor
I always just use grade 8 where ever...im not sure why some people here are saying a grade 5 would be better in a shear application? here is a...
yes its worth 34542244553345 zen
how does this help in the building of a hot rod...yall just get boners when the wind blows
harbor frieght...bitchees
agreed...there are counter people out there that do know what they are doing. for all those bitching why don't you do 5 seconds of internet...
get both...put the drive train from the roadster in the pickup, and then sell the roadster with the pickups guts
hudsons are the sheeit my granny went draggin down chester ave in bakersfield in her parents' brand new one...vapor locked it, thought she broke...
21...building this...need to stop drinking so much now that i can buy booze [IMG]
check ur oil level as well to make sure it isn't over filled and sloshin up on the couterweights during a quick stop
this has got to be BS...why arnt there n e of these in phx?
Separate names with a comma.
The Jalopy Journal
