The Jalopy Journal
[ATTACH] [ATTACH] [ATTACH] First pic is 455. Heater box makes it hard to see much. Other 2 are the 430. I couldn't tell much difference from the...
The above chart shows a 68 400/430 being different. This is a 68 430 out of an Electra in my build. Best pic I have of it right now. Don't know if...
I tend to gravitate toward stuff that is differnet. So sorry to say, A's, Deuces or tri-5 Chevies don't do much for me. On the other hand, an old...
Not from personal experience but I have heard they can be very difficult to bleed sucesuflly
Theres also this thread. http://www.jalopyjournal.com/forum/threads/p15-d24-to-95-2001-explorer-disk-conversion.702258/
I'm having trouble picturing that.
I'm sure I'll figure something out. I've got a couple of different ideas. It's a long slow build. I really only get to work on it in the winter,...
I found some big GM panel trucks and motor homes use a bell crank too but that stuff looks pretty high dollar and probably overkill for my project.
Thanks, good stuff so far. Hodroddon, this is what I had in mind. Did you build the bell crank assembly, details? Looks like heim joints. What...
I have a situation (Chevy straight axle with 1/4 elliptical springs & short arms) where I want to use a bell crank to convert a side steer set up...
Edit - I guess if it's a red unit, it's probably Ignitor II and is supposed to protected from key left on damage. So it looks like my theory is out.
Glory be to You Tube.
[MEDIA]
What difference does it make which side the spring is on? Not arguing, just asking, since I plan to use this style mount on my current project....
I don't know about car stuff there, but. I spent a few days in Sweden on business many years ago. I hadn't been to Europe before. I was in awe of...
A peek at what I'm working on. Maybe not 100% traditional but built on the CHEAP mostly from freebies, left overs and lots of weld filler....
Are you talking brackets all the way up the side of the rad or just over to the bottom holes? Either way, if the rad is mounted solid to the...
I have an aluminum 57 Chevy radiator like this for a custom roadster project I'm working on. Overall size is perfect for the space I have to mount...
Ok, I read through the listings on car-part and some specify dipstick in pan on left side. Monza and Malibu are the only stock pan mounted SBC...
I'm confused, the original post says passenger side now you say left. Chevy Monza V8 pan has dipstick in the pan on the drivers side, but can be...
Not V8 Monza unless they changed sides somewhere along the line. I just looked at mine to be sure. All three that I looked at are in the pan but...
Google found good info here- http://www.driveshaftspecialist.com/HTML%20Measure/UJ%20ID%20Guide.html and here-...
http://www.eztbucket.com/Steering-Brakes_c2.htm?page=2 I got mine from this guy. What he shows is for the later spindle. You have to ask for it...
Charlie is right. Came out in 77 for GM H-bodies. Versions of it used in lots of stuff through early 90's. Check wikipedia "Iron Duke" page. I...
If you want something similar look for 4 cylinder S10, 2.5 liter
[ATTACH] [ATTACH] I pulled these from a video I found while looking for ideas for a 59 Buick 4 door that's coming my way.
Don't know Bob but a quick Google search came up with a few numbers for the business. (417) 239-0700 (417) 239-0009
Found it. R&C March 2009. http://www.rodandcustommagazine.com/techarticles/0903rc_1950_chevy_chopped_top/ 50 Fleetline but that's the concept I...
OK, maybe I saw it in rod and custom. Anybody know what issue?
Thanks for the reply Dreadnaught I've seen that one but that's not it. The one I remember the trunk lid was not changed at all. It would be a...
Separate names with a comma.
The Jalopy Journal
