The Jalopy Journal
Yup again [ATTACH]
Thanks. flamed34
Thanks. It is PPG Shop-line 2 part. I'll look at the data sheet.
Hope I'm not hi-jacking this too bad. I have just used epoxy primer then high build and there are a few small spots that I have sanded through the...
Sad, very sorry for your loss Larry.
A friend has had good experience with them and there products have been very good. I plan to use the 400 kit on my 57 Cameo.
Their web page is near impossible !! :confused:
CPP has a kit that uses the 400 series box. ccp5559psk-oc. http://www.classicperform.com/Series400/400SeriesPowerSteeringBoxes.htm
Hi Sam. 74 may have the front discs. Get the pedals and linkage and look to see if it has discs. You can change to a disc/ drum master later if...
I have been testing a similar installation in a 31 Chevy. 45 years and 117,000 miles and still working fine.
Hey Sam, good score. Chasing parts beats school any day.;):D
Yes. Getting to old to crawl out of it. :( And 31 Chevy is nearing the end of third rebuild in 49 years. That one is not for sale.
Sam. Looks like there may be room for a cross flow to fit between the frame and under the fenders; or possibly stand a cross flow up on end if we...
Anybody else have a son with his own garage and a key to yours.;) The good part is I have a key to his also. He has some NICE tools !!
double
Radiator still doesn't care . If pump is discharging coolant, plumb to top tank and lower tank to engine inlet.
LaBaron- Bonney company. http://www.lebaronbonney.com/
May consider checking NV4500 trans. Similar in size with 5th gear overdrive. May address your rear ratio/ tire size better. They are pricey though.
How about a 57 Whitehouse? Just needs a color change !!![ATTACH]
Good that it will work for you.
Hi Sam. Push the yolk in until it bottoms out then back out about 1 inch and that should be ok. Looks close where you have it.
Nice Christmas gift. Several decisions you need to make before ordering wiring components. Steering column choice is the first. If you use the...
MissysDad1 has good advise on the trans cooler heater. The small diameter tubes in the trans cooler may restrict the hot water flow and produce...
Nice looking welds Sam. Have you found the Miller an improvement over the Harbor Fright ??
Not sure of the type of radiator that you are using. If it has flanges on the sides with bolt holes it bolts directly to the core support. If it...
I have put a few miles on my 56 since the early 80's.[ATTACH] [ATTACH]
Very nice addition Sam.
blowby... Dingus clip is to hold the two way radio whip antenna in a down position.
Thanks Tractorguy and PnB
That's creative Sam. The trans looks like a 58 to 64 Chevy.
Separate names with a comma.
The Jalopy Journal
