The Jalopy Journal
like the man said small, cheaper than a mustang, light car!
There should be cars for sale in PA. but that seems to be a good price and it's not that far. light car small motor a good combo
they shouldn't be allowed to sell those dial type regulators pure garbage
there is no good reason to build a small high reving low torque for the streets, but i have one for my altered if i ever get it finished
i just finished installing a borgeson power steering to one
i've had axles bushed to stock size at the local napa and used stock replacement pins
on a nova i plugged the stock holes and redrilled the upper shaft 1/2" further forward to increase caster
why go to a smaller motor?
it would be AA/Altered or BB/ALTERED depending weight to cubic inch
you just creep up on it untill the preload is achieved go slow and do it right
i would rethink the compression ratio unless your running racing gas or e85 you should use something around 9.2-1 for a daily
i get most of my custom pans from Stef's in NJ
it's big and ugly but it's hard to get better for the same price
we run tall deck blocks and use Indy intake no spacers they need to be port matched little field 8-71 20% over
tom what are you doing with this info?
changing mounting points would change the torsional stiffness. it's a crutch softest suspension is the best way to go but a lot of racers like...
yes the strip ran 90* from the road west to east the ditch was at the end of the 1/4 mile causing a bump after repaving the area making the cars...
here we are not allowed to tow with a chain or rope, and no one is allowed in the in the vehicle being towed use to do 5-6 hr tows to the tracks...
i believe some had relieved blocks and or high compression heads
i'm installing a borgeson power steering on a 54 ford using the stock column the horn ground wire passed through the center of the shaft i can no...
i am in the process of making a floor in my 52 i used 1x2x1/8 and relived the under side and was still overkill a friend had hats made out of 16...
don't take any leaves out shorten on the shackle side you have to keep them stiff on the fixed side to stop spring wrap on braking
1934 you're wrong air does enter the system usually by the opposite valve cover with a hose going to the filter. with a filter on the tube and the...
i don't know if it was born that way, yes it has fixed quarter windows. the car was dismantled when i got it all in boxes it was a father/son...
i'm working on a 52 bus. coupe and it has a rear seat
as stated above lifter have jacked or are not compressing enough to allow the valves to seat.even had it happen to cars that had 10w instead of 5w...
what we once had doesn't count i had 4.88 in my daily driver and 5.67 in my nova but so did everyone else around one guy had 6.17 in a 67 firebird...
i flipped a diff on a 57 chevy only put a 5" notch used a piece of round tubing as filler used the stock springs and bed
i could see better with a stick welder and learned to weld round tubing i use a mig now but don't see the welds depending on the angle. i really...
how well does the Scotts work is it streetable?
Separate names with a comma.
The Jalopy Journal
