The Jalopy Journal
we ran vega torque behind sbc chevy's and pinto c3 torque in c4 trans behind sbf they worked better than so-called 3500 chinese one size fits all.
a friend has a lift like that on his van but not as tall as the ramp part folds up to hold the chair as it lifts, when the chair is rolled into...
depending on the size of the truck it shouldn't be too hard to install a fwd clip and there is a lot more room under the hood of older trucks than...
just because you have access to equipment doesn't determine the results training and practice help and some will still screw it up.
all the stores sold stick welders from sear catalogue to the local co-op and everyone had 6011 or 7018 rods and used the tools that could be had...
30-40 years a guy i knew a vintage series with a MG he did alot of work on the rotating assembly longer and lighter connecting rods stock rods as...
a IH loadstar was on a road test after repairing it and decided to go for my driver test when the tester asked what i was driving i pointed to the...
somebody is a good metal worker any pics of top i went to your profile to see there where not any of the top it's self.
99 have you worked on your top?
99 i've used that when i made my tonneau cover for the altered it works on flat or convex contours but needs support on exterior radius corners...
the top can be removed and installed by one person but there is less chance of scratching something with help.i only have wood around the window...
porknbeaner is right smaller doesn't mean it's better on gas it all depends on hp-weight and gearing with tweaks on cam, carb/injection, and...
i would use the 350 change the heads run ram horn exhaust a quadrajet, the 4" bore will help the heads flow better, the quadrajet small primaries...
the distributor i deal with carries oil, grease, racing gas, and delivers directly to me.on there weekly run and i'm 2hrs away
any motors with flat tappet cams need zinc it's best to use oil that all ready has it Brad penn VR-1 etc even motors that none roller rockers need...
i installed a mustang gas tank in a 57, removed and flipped the rear cross member installed the filler in the box using a flat mounted flip-up...
here are some more pics
that's what i did
i didn't view the video didn't know it counted! good luck
i've always wanted to mount a bigger late model fwd power train in an older pu to use as a small car hauler should not be any harder than...
need a big push everyone should vote!
just to bump
what's your status now? come on everyone VOTE
i don't mind fiberglass but hate vinyl wrap and patina, go with glossy paint hand lettered and gold or silver leaf on the boat i help on has...
It only matters to you and it represents the period your are looking for it's perfect!(facsimile) enjoy!
under 400hp pm rods are reliable built a dozen or so motors in the last couple years and the rods didn't fail i wouldn't say the same for...
pat the car looks good. I like the GM intake it looks cleaner, use a carb adapter and your carb.
i've done steel on steel for 40 yrs never had any oiling problems i actually liked it better than boring the rod making thinner and installing a...
inertia of a heavy flywheel makes starting from a dead stop by keeping the rpms up when releasing the clutch making for a smooth start.
if you use a quick change the drive-shaft is lower it would be easy to adapt front drive to and thing there was a guy that converted a school bus...
Separate names with a comma.
The Jalopy Journal
