The Jalopy Journal
You can pull the pan in the truck and work on the clutch via the inspection cover inside the truck cab.
Update: Well, I have learned a lot about welding, such as a new vocabulary, oh and some new skills at using a welder. I had replace the rear pass...
Another thought, head gasket blown just enough? I believe the flywheels are the same just the clutch goes from 9" to 11" if I remember right from...
My 2 cents worth: condenser, vacuumm leak at manifold/carb/wipers?
Might try over on the Garage journal. Mike
That is so cool! Straight 6 or 8? Mike
Yep, I used to do that as well, thinking logically that it needed to be full. Nope. She would spit water out and then settle down to her level and...
Really the only reason for the rad to push water out is: A) finding its level (My Model A will do this if over filled), B) the rad is plugged up...
Here is something maybe you can use. Microsoft Word - Generator Insert Mike
Two things, check over on the Ford Barn for info as some over there have been converted. It is more for stock but I know some run pinto motors....
Well, still working on the pass floor pans. But had to cut the pass. toe board out as well. All due to the normal cowl leaks from the fender. But,...
Ok, got a lead on some '312' Y block parts while at the swapmeet this weekend. Besides bringing my caliper to measure the bore of the piston-just...
Gimpy-I have come to the conclusion that is what happened. I cannot find any damage to the car at all, I looked closely last night and tried to...
Bangingoldtin: They are actually still solid. The driver side I just derusted a bit and then painted it with rust encapsulation paint. 34GAZ: The...
Tow Truck: Yes I know about the gaps, I had a hard time shrinking the panel to match the hole that I cut out. So I will be making pieces up to...
I need urgent help here guys and girls. I am finishing up the pass side toe board on my 57 ford wagon and the next thing up will be floor pan....
Great looking car! Rebuild the brakes and with a stockish engine you will be fine in todays traffic-as long as you drive within the car's rated...
OK, I am slowly finishing the pass side tow board-skills are slowly getting better-very slowly. BUT, my question is this: both sides (dr/pass) the...
I have several rolls of the Lowes stuff for the floor and roof. I still have the house insulation in the roof right now and the original tar based...
Since the truck was a hit at the local show maybe try this on for size. Take the engine that is coming out and maybe put some clear plastic on the...
That is sooooo cooool!!!!!! You are brave as 41 GMC noted it is not for a newb when it comes to prewar cars. Looking forward to the next video and...
If you have an intake and exhaust that both come off the head are they both perfectly flat? May try and squirt some starting fluid around the...
Thank you all for the suggestion. I already have a new tank in the car, this is the original tank and I am just trying to clean it out so I can...
Beanscoot, I know. But the job says go and I go:(
I was planning to go but work decided to send me someplace else. There goes my vacation..... Mike
Yes the site is still around and you should be able to register. I am on there occasionally, but it is a bit slow in answers though.
The stuff that is in there now will drop you in a heartbeat. It is so bad that the mover would not let it in his trailer! That being said I have a...
Ok, I want to try and get rid of the stinky smelly shellac that is in my original 57 gas tank. Any ideas? After it is gone I am going to try the...
I know of three shops in your area-sort of. 1) San Leandro-AL HUBBARD'S machine shop on Meekland Ave. (Races Model T's and is an old school...
How about using the license plate light as a back up light? The one on a stock Model A tail light, maybe have to use both sides?
Separate names with a comma.
The Jalopy Journal
