The Jalopy Journal
Anyone notice the 1934 plates on it.... Could it be.
That is sex right there. Beautifull
My 65. [IMG] [IMG]
You should get the studs converted to screw in. The clearance is not function of the cam lift but rather using roller rockers. You can use long...
Look, anytime you have a header made with different sized tubing joined at right angles to one another, you are going to see this failure,...
All true. Pinion angle must be considered as well.
Great car. The engine haters would change their minds in a second if they ever saw it run.
The bottom bars should be parallel to the ground when the cars weight is on the chassis. The upper bars should be adjustable in length and angle,...
That is a crazy amount of steel.
Sold my 65 Imp for the downpayment on my house. Do I miss her... yes. Do I regret it... yes. Was it the right thing to do... yes.
I'm astounded at the number of people in this thread who think an improper tune couldn't have caused this failure.
Lots of good info on this site. Even if they are specifically talking about a drag suspension, you can apply the basic theories....
If the paint is aged and has lost its sheen, it should strip just like any other paint.
Three thou is huge on a sbc.
You can get 0.001" undersized bearings if you need them. Make sure your measurements are accurate.
Everything you measured was at the same temperature?
Racing in the Streets - Springsteen.
What is the clearance? Are you planning on racing this motor?
What's your base timing at?
That's the great thing about Ottawa. You NEVER hear about these events until they're over.
Are you on a well, or city water?
That's a very odd way for one of those cars to rust. The quarters and floors must not be original either.
Is there any possibility the starter was rebuilt to 12 Volt specs? Or possibly a later 12 V starter was bought at a swap meet and installed by...
I used to see these in British Columbia up until about ten years ago. More pics of them here http://www.hankstruckpictures.com/kwpix4.htm A...
12-14 initial, 34-36 total ( set with no vacuum advance ) Your vacuum advance canister should add another 12-20 for part throttle operation. The...
The official Government site. http://www.tc.gc.ca/roadsafety/safevehicles/importation/index.htm The Third party brokerage firm that the...
I would imagine those are fairly rare, and worth a fair bit. think?
Can't stand the noise of an electric pump. Even a standard mechanical will flow enough to support your motor easily.
Assembled my first motor in my parents basement, 355 sbc, and carried the short block up the stairs to the garage..... Obviously younger than now.
Had my 454 4speed Nova start on me, while I was standing in front of it using a bump switch. It had a 4.56 gear though, so I was able to catch it....
Separate names with a comma.
The Jalopy Journal
