The Jalopy Journal
I ordered 93 aerostar springs for mine initial drop was 2½" settled at 3".
I have an 89 model 350 in my 51 f1 removed the fuel injection used an old wieand 4bbl intake by modifying 4 center heat riser passage holes on...
For what its worth I have a c-4 adapted to my stock flathead it came with a Fordomatic with 3.54 gears. Not a hot rod, but it does ok till you...
Try this, I bought a GMC truck that ate starters and flex plates. Take solenoid off of starter, pull dust cover and mount starter. Manually pull...
I picked up a Sidney 12" with a 42" bed last year, Learned a lot just by hands on. I worked as an outside machinist so I had been around lathes...
I am looking for Operators literature and also tachometer gauge and cam gauge for model 31-02 synchograph. Any help would be appreciated. Tony
51 F1 drive line and wiring complete, need good weather and be recovered from this DAMN FLU to start blocking and sanding.
I have a shop vac with a hose out the window, works great to remove the dust from the room! But I have found that it clogs vac filters fast and it...
Mine is the same as Yours, large cap came off easily. Same brand as yours, bought it off of Ebay installed and bled brakes Surprise Surprise it LEAKS.
My cable was square, the GM adapter had a slip on plastic spline like a key. Slipped right over my cable like it was made for it. For reference if...
Check what the recommended torque is, most people over tighten pans over cork or neoprene gaskets. Common cause of the pan looking like yours.
I would use anti freeze.
I have a auto dark hood from Trac Supply, the focus point for my eye glasses did not match well with the hood. Solved by rotating lens in helmet...
I used the original cable from my 51 F1 hooked to th 400 Gm trans, same threads. Only problem is speedometer registers correctly odometer runs...
1972 Mustang with drum brakes front and rear, worked for me.
I run Chevrolet exhaust valves in mine, may be what you have.
Check on the 54 site, one of the small Ford car spindles will work on it with minor modifications. You will have front disc and calipers . I don't...
There was a 235 and transmission on ebay a couple of days ago, sorry did not look at location.
got them on my 53, looks good handles great!
Parts are still available for yours, I had a 59 anglia 2door sedan, that motor was bullet proof! I got 25 mpg running it hard. I would rebuild the...
First check that you have the correct pcv valve for that engine, they are not all created equal. Second if it hooks to the aluminum plate under...
That appears to be a fire truck photo the pad on the left is for air horn.
Bought one from Napa at their tool sale, reasonable and works great!
I have a 52 8-N with a Sherman 3 speed auxiliary, takes care of 4 acres and has lifted several flatheads in and out for me! Also have two torn...
I make darn sure my creeper is comfortable, = nap under car!
I think I have an old catalogue out in the shop that has repair pieces but not the whole mount, I am going to look now. Got it Surplus supply Co....
My first 8BA had pennies in the heat risers, when I adjusted my valves I pulled them out. The pop on deceleration stopped don't know if it was the...
Like that color boy same as my 53
Buy an aftermarket drain plug that is magnetic, makes diagnosing a problem much easier!
Guys around here use one out of a Honda, I am not sure which one.
Separate names with a comma.
The Jalopy Journal
