The Jalopy Journal
Napa sell a sealer called blue devil, Best I have ever used!!!!!!!!!!!!!! I have a small block chevy with 10" freeze cracks down each side never...
Ordered door hinge pins from Macs, advertised as like OEM. New pins will not fit - factory pin measures .279 macs measures .284. Macs says they do...
Thanks guys I am just mocking this thing up so any changes can be easily done. I will have to check to see which one will be easier. Tony
I have a 51 F1 with a 350 sb and th 400 trans. I have the front engine mounted on original flat head mounting pads with a hurst front engine...
Thanks guys that is exactly the info I was looking for
Thanks Mike I knew about that one, it uses the same ujoint yoke as mine I am looking for something with a little more beef!
I put a small block chevy in my 51, what rear end will fit and take a modern ujoint? I cant find a crossover to fit. Thanks Tony
welcome from southwest LA
One hard backfire could blow the power valve! pull the power valve suck on the diaphragm side if it leaks air through it is bad.
I have a C4 with a speedway adapter, I sure could use another gear! If the C4 fails I will put an AOD in it for the overdrive.
I will be there Saturday, found a lot of good speed parts for my 8BA flathead at the fall meet.
I have a set on my 53 that came from Bob Drake, fit great, look good on sale for 79.00 when I bought them.
I put a c-4 in my 53 Customline, I could not find a crossover u joint from stock to c-4 yoke. I had Napa build the drive shaft, they did a search...
I saw a salesman demonstrate Wynns friction proofing in the mid 60s, accelerated old Buick V8 to 60 mph dropped an egg. Added Wynns to oil and let...
Jim I bought all my rebuild parts for My 53 Customline from Napa. New wheel cyls for 8.00 ea . All engine parts were overnight shipped good...
Bacon rind works great for me!
WoW That will Be a Great ROD!!!!!!!!!!!!!!!!!!!
I may be sending a dual post, I had a couple of them I used to run in an old B class dirt tracker. they were out of a ¾ ton pickup would that be...
My 53 Ford had a w/s washer pump similar to that but it was mounted further down on the toe board. Tony
Billy I have a Winfeild cam for a 59ab ( front distributor) marked ¾ I might trade! Whatcha got for an 8BA? P/M me. Tony
I have several antique cars and trucks I need titles for! How do You get a good LEGAL TITLE in Louisiana? Hope this is the right forum I could not...
Bacon rind works great, tough enough for multiple catches.
I have a 2100 holley on my 53 Customline it works really well, kit was available at Napa.Bolts right to the three bolt flange where Stromberg...
Cowl antennae looks identical to the one on my 51 F1?
Stitch lock repair will take care of that no problem! My Flattie has two cracks through valve seats and into cyl wall. Craigs automotive in Eunice...
Coming home from the Races in Leesville last night a big Doe ran in front of us, missed her by inches don't know who was scared worse close...
Welcome from s/w Louisiana I am also building a F1 it is a 51 I am going back with the old flathead! Luck with yours. Tony
If your car is like mine the bumper adjustment did not help I noticed a difference in gap at door to front fender, loosened bolts and lifted...
Hope you have enough room in that roadster for your knees, it looks like it is channeled pretty deep!
Sell it to me when You change it, mine is rusty! There is one locally with teeth out of a Desoto to me it looks like crap others think it looks...
Separate names with a comma.
The Jalopy Journal
