The Jalopy Journal
No 308's from factory in the Jet---However, a Twin-H dual carburetor setup was an option on the 202 engine that the Jet (and other Hudsons) used....
I had the seventh E-Jag delivered in San Francisco in 1962. Ordered British Racing Green, came in "Charcoal Gray". With the red interior, it was a...
http://oldyeller2.com/history.html From hot rodding to sports cars----
You might be interested in this: http://www.jalopyjournal.com/forum/showthread.php?t=384289 A friend of mine built the exhaust for Dave and...
"If brains was dynamite, he couldn't blow the wax outta his ears!!" "If brains were money and it cost a nickel to go around the world, he...
Google " John DeLong"--seems to be quite a bit of information---Some interesting stuff!! I had a DeLong cam in an OT aircooled VW---ran very well.
http://www.google.com/search?q=Alfa+Romeo+2000&source=lnms&tbm=isch&sa=X&ei=CJDfUamoDMOaiQLNwYDoBg&ved=0CAcQ
I know of one person that is installing a 308ci Hudson Hornet flathead engine in an early Plymouth Coupe. 1/2" stroker crank takes it to about...
Sorry but I can't seem to post pix--Not really a HAMB-friendly as it was built by Sam Foose and updated by Chip, but still beautiful!! Click...
Son in law (ex) used the tube off a percolator coffee pot to repair a leak in an automatic transmission cooler line. Borrowed hose and clamps from...
Anyone checked out this:http://www.atrackroadster.com/ ATR uses torsion bar front ends-----
Not a raceboat but period--- Originally built in 1957---refurbished in early 60's. 13' Thunderbird V-drive. Was unfinished hull that we...
I would wager that there is some "creative financing" available for purchase and renovation of one of these buildings. Think Urban Renewal...
Some pix from the Oakland Speedway, circa 1949---With a little 1949 skin!!
Car has a 1947 Grille---- Check out the Hudson forums: http://www.classiccar.com/forum/ Lots of Hudson information.
Another good source for all things HUDSON: http://www.classiccar.com/forum/ Check out the HUDSON street rods section also.
I'll be first----- http://www.uncommonengineering.com/catalog.html
We used a Harbor Freight ELECTRIC winch many times to load everything from Model A's to Hudsons on car trailers. Did Aston Martins and a Ferrari...
http://reds-headers.net/index.php?main_page=index&cPath=4&zenid=944749eafd80181fd5e7da2e4f97b7b3
1953 Oldsmobile Super88 two-door sedan. Paid $700.00. Absolutely like new, had the odd-ball three speed standard transmission. Bought in 1959 to...
Going back a little further, does anyone recall the old DragStrip in Saugus, CA? About 40 miles north of Fernando. Used to visit when a...
Great Car!! I have the exact same model, '49 SuperSix and have changed to a 308 Twin-H also. Three speed straight stick trans. You might want to...
I have seen a midget about that size with a four cylinder Indian motorcycle engine. Quite a few early cars used larger motorcycle engines, H-D,...
Moparrob--The Hudson special you mentioned is a HUDSON ITALIA. Supposedly 26 built. HUDSON shipped their 1953-54 Jet Economy car chassis to Italy...
I replaced the 4.1 Hudson R/E in my '49 SuperSix Coupe many years ago with a 3.08 from a Dual-Range Hydro Hudson. Difference is I have a Twin-H...
Not sure of make, but most likely an auxiliary after-market trans for "TT" Possibly a Warford?
Deuces migrate TO California in the fall, not FROM-----
WOW!! Those are the "Tunnel Port" heads---Rare as hen's teeth--Most powerful FORD engine short of the SOHC 427 and Boss 429. Ford built 427's as...
Try this site---- http://www.classiccar.com/index.php?option=com_kunena&func=showcat&catid=24&Itemid=152 Lots of cool information on the...
For REALLY NICE chrome plating, Sherm's in Sacramento. Be prepared, tho---it's EXPENSIVE!! I have seen work by other shops that was almost...
Separate names with a comma.
The Jalopy Journal
