The Jalopy Journal
There was more cars MAKE SURE your camera actually takes pic before moving on...
And got some pinstriping done on My Hotrod [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH]
[ATTACH] The amount of classic campers was unreal [ATTACH] [ATTACH] The 34 was sporting a big olds
It was a nice day for a car show the drive-in was gorgeous. The clouds held in for most of the day did get a little warm between about noon and 2...
I agree, out of state sale.. I would ask same also.. Title matches VIN. KEEP all email correspondences though. Freind just bought a 67 Pontiac...
wow nice chop Not over done looks just right
They are actually little bigger than the head. that's why they slide over the SBC stock ones
Sometimes tough to get the correct county for where you live.. AZ had plates per county.. I have a Yavapai county on mine, Where I live, got lucky...
One does not have to goto the DMV when checking for a plate to use.. AZ MVD Now <----- Go there and look up plate number and see if in use. If...
Just driving around town here it had a small oil leak coming from the valve cover.. hmm Thought I glued it down good.. So drove to work for a...
Was able to get a quick snap of the truck together. Small bits need to be tidy-up [ATTACH]
Got the lights wired grilled installed... [ATTACH]
Looking good
[ATTACH] Myself I use this... Easy to spread and sand Others may like different
Welcome to the group I will be watching this one.. Hope the build goes smooth for you.
In Havasu when I was building boats, In the summer 30cc of hardner was used, In the winter 60cc's per number 10 tin can.. YES kicking to HOT can...
This is Mat.. [ATTACH] I have NO cloth for a pic..
You are correct on this.. But same rules apply, Right amount of material and NOT resin rich. When you can see the hairs in the Mat you are about...
Again I kick my resin HOT and work FAST, Lots of years repairing boats, This was all done inless than a hour.. Including time for the resin to get...
Here is rough grind on the front.. If you work carefully it should turn out the same.. [ATTACH] Once I sand rest of dash and Prime there will...
Now back to the back area.. This is where you will thank me.. As seen when you RIP your material your not creating a "HARD" edge and it finishes...
Smooth out your work and let it go off also...
VERY IMPORTANT HERE YOU MUST GET ALL AIR BUBBLES OUT AS SEEN ON THE EDGES ! [ATTACH] The air bubbles show up as white or clear as seen
Now to the front.. Prep/grind your area again 36 grit, And RIP your material small one for center a little larger for next and one to cover...
Mix your acetone resin and hardner.. I shoot a little HOT but would recommend manufacture mixing ratios for those that dont move so fast.. Wet...
Separate names with a comma.
The Jalopy Journal
