The Jalopy Journal
I'll order up one! thanks and as always I appreciate the help. Ive done trucks a long time and there seems to always be a stumper on each project LOL
is this the item I require?
So this ball stud screws into the end of the drag link opening thats not on the end but on the side of the end? on the other side of the grease...
hi, I am working on my 54 chevy truck. I've included photos to show I need a certain piece but can figure out what it is. The pittman arm?...
i figured it out. the bearing race wouldnt fit over the spindle. I exchanged for another and its all good. thanks
truck
Ive done brakes, bearings etc. on trucks but somethings amiss this time. 54 1/2 ton front drum brakes. I replaced everything except the drums and...
Yes, were lined up. And I think I'm ready for trans install too. First I"m painting everything separated.
Hi Well I did it. I swapped the car bell housing for a truck bell housing.... in under two weeks LOL. All went well, and every one was very...
I found rims...thanx
I I understand now whew! Removing the bolts is correct, attaching anything to those holes is like trying to pull the crankshaft through the...
Starting to sound like the bolt removal thing was not the proper course of action. LOL
Thanks for the advise. I'll give it a try
I removed the 6 bolts around the center and used the holes to re-insert the bolts with the puller metal ( which has the exact pattern) and screwed...
Ill try heat. Thanks
I am trying to swap bellhousings. Ive removed everything except the flywheel. Bolts are out of the flywheel, but it wont break loose. Im using a...
hi can anyone tell the name of the metal rod with a slot in one end, that inserts into the rubber ends of the wheel cylinder on brakes? One end is...
Hi all. I've done enough investigating to even be more confused. I've completed numerous truck projects, but I've never attempted this before.......
Posted some photos for transmission id
Good Morning, I need a little help Oh wise ones... I looked for hours through past posts and the interwebs and find info on my problem but no real...
ive used a tilt s10 steering column in my project. I didnt want to have to use the s10 wheel attached to it. does anyone know what other wheels...
I was advised on and bought a frame mounted master cylinder and power booster. My setup is commonly used on rat rods from what im told. Ive got...
got a photo? ive been looking high and low for a small camping trailer
im restoring a 1950 studebaker truck. my issue is the ford 9" rearend and wheels. i have a s-10 front frame that transitions under the cab to a...
Separate names with a comma.
The Jalopy Journal
