The Jalopy Journal
Well that'll teach me for being a glib bastard! I couldn't read the name on the club plaque. But the Coker Car looks gloss dark red and Brian's...
That's bizarrely cool! After-market converter companies; Pro Torque, Transmission Specialties, PTC, etc, should be able to make a half GM, half...
It looks like it's this one ; http://www.streetrodderweb.com/features/1105sr_1932_ford_tudor_sedan/viewall.html which i found by Google Images...
If the sealing ring was broken when you pulled the pump out I assume you checked for a ring wear inside the high gear drum. If you're replacing a...
Well you might find some in the pan, (time for a service, use a brass screen filter). but I would want to remove the pump and check it out too.
It's hard to tell from the side-view photo of the piece of shrapnel, but I think its a piece of the pump bushing. Although they don't usually...
The gap between the converter and flex plate should be 3/16 to 1/8, any more and shims must be used. Use drill bits as a 'feeler gauge'. 1/2" is...
It's the clip that holds the speedo gear to the output shaft. If your speedo works , the clip has already been replaced or the gear is tight...
This type of shifter is mounted using acoupla tail housing bolts and two bosses cast into the case, one on either side. These bosses are used with...
Separate names with a comma.
The Jalopy Journal
