The Jalopy Journal
I have a local UK built harness, 12 circuit 12v negative ground to go in as i converted it to 12v earlier in the year. Sent from my SM-G930F...
Tank and seats in[ATTACH][ATTACH] Sent from my SM-G930F using The H.A.M.B. mobile app
All ready to bleed the brakes and re wire her[ATTACH] Sent from my SM-G930F using The H.A.M.B. mobile app
Bit of a photo dump of where ive got 2 last couple of weeks. I think they speak for...
so I chopped out the passenger side rockers, and fitted new inners and outers, no pics of this at the moment, sure i'll find them someday though....
[ATTACH] Finished off the rear at the weekend, temporarily held the bumper in place to see where I want to chop it to narrow it a bit. Its not...
[ATTACH] Finished up the rocker and the b pillar area, cut the rot out of the bottom of the door, and fitted the inner and outer front fender to...
My Shoebox in the UK, partway through a resto, it has its own thread for better images!
All just tacked into place at the moment, hence there being no outer skin on the B pillar end, now its all in and solid I can fold up the inner...
Some more progress, if anyone is on the Shoebox facebook page you'll have already seen these, but for everyone else, I have rebuilt the A and B...
Couple of before and afters. Slowly getting there with the external welding repairs. Will be bracing the body this weekend and replacing rockers...
Onto some bodywork, has quite a bit of lower body rot to chop out, rocker panels, floors towards the outside of the car, and some of the lower...
Started to strip the engine and clean and rebuild it, im sure most of you have seen an 8ba being rebuilt before so im not going to talk you...
Wasnt long before i had to get the engine out, it was siezed solid and there wasnt any shifting it, on top of that the desert had destroyed all...
[ATTACH] [ATTACH] [ATTACH] So this is the car as it arrived, nice bit of desert baked patina on the paintwork which is being maintained with...
Hi guys Been a long time lurker on these forums, looking for inspiration for builds both current and future. I have had for a year now a 1950...
Thanks I think I might have managed to get it to engage properly now, I took the selector rod off again and bumped the car back and forwards a...
Although it also 'clicks' into place for reverse, which I assume is the plunger holding it in place, is there one per gear or just one per...
Thanks a lot, I will look closer into this tonight, and check the shifter from the outside, rotate the gears etc.. yes its a passenger car not a...
Morning guys, Bit of an issue here (and being in the UK these 'boxes are not a dime a dozen to compare!) My 3 speed OD column shift in my 1950...
Close, i believe its palisade green with a matching green interior with black accents on the doors. Plan is to weld up the floors and new sills...
[IMG] [IMG] [IMG]
Hi all, Been lurking on this forum for years now and finally got myself a nice project, a 1950 Shoebox sedan (custom I think from the spec,...
Separate names with a comma.
The Jalopy Journal
