The Jalopy Journal
Just wondering if anyone here has any experience with "Rick's Radiator Service on Arrow Hwy. in Azusa" ? :confused: Just returned from a...
Well the snow has disappeared, hopefully to stay and time to start looking for parts again. Trying to replace the hoops on a pair of 53 Ford...
These are pictures of the brake drums off my 57 Ford car rear axle. Trying to decode. Does the 1128 mean they can be turned to 11.28"? [IMG]...
Looking for a cheap reliable window regulator mechanism to replace the worn out and damaged units in my Model A, I came across a 85 Jeep Cherokee...
Does anyone know when Ford changed from the 2 9/16" centre bore used in early 50's (1953-57) to the later large 2 3/4" bore used in the early...
Years ago used one of these neutral start switches on a TH400. Know it was off a GM van. This was the spare I kept just in case. Does anyone...
Getting ready to modify a Chevy tilt column for the A. Would like to try and identify what year and what it can out of if possible. Any help...
Making some mounting brackets for my front radius rods. Cutting a couple of plugs out of 5/8" thick plate from the scrap pile (probably hot...
Would like to change out the valve covers on my engine. Are valve covers on ALL nailheads inter-changable? Would like to put the 53-55 covers...
I know it is not a traditional rod, just my daily driver and wheels to get to BTTFs since the coupe is a long way off. In the process of...
Not a Tech Week submission, more like a request that hopefully could help a lot of people. Looking through all the various vendors and the more...
Was asked for a little more information on this After being inspired by the postings of work being done by the Ionia Hot Rod Shop , I had to...
The body was the start of the build, found in a a barn a few miles from home. Kind of rough, but affordable. [IMG] [ATTACH] Started off by...
Looking for help on possible sources of wheels. I have been told that 1953 54 International 1/2 T or 1963-64 Dodge 1/2T wheels, 15 with 5...
Just picked up a new pair of shocks, not gas style, designed for a 67 - 87 Chevy K-10, K-20 4x4 front. They are a good length and end style to...
This worked for me: Open Norton Security - Advanced Options. Add "www.jalopyjournal.com" site as shown in left side of screen. Go to...
Still working on my first attempt at building a frame. Setting up the ride height. Know what I will end up with on the back, the front is the...
Does anyone have the dimensions of a 66 Buick TH400 from the front of bellhousing to trans mount and to the rear of the transmission? Have been...
Am I making any mistakes with the design and construction of this Model A frame? Help before I start welding it together. [img] Have the...
Trying to ID a ford rear spring I have. Was told it was off a 41 Ford Rear. Spring is 2" WIDE , Perch centre to centre is 37 3/4" when relaxed...
Looking for a engine for my coupe. A friend offered a 63 Buick Riv engine and tranny. What all is involved parts wise to replace the Dynaflow...
Tech Tip 309... Rusty Screw Removal Made Easy Works GREAT. Five minutes and the screws were out of both doors on the A coupe. [img] Thanks...
Just a little pay back for the help I have received from the HAMB. Pressure Sand Blaster on the Cheep Material Required; -Old BBQ tank, I...
Separate names with a comma.
The Jalopy Journal
