The Jalopy Journal
black. eeeexcellent.
Thanks ! anyone get a price on the 32 Pheaton? got a customer wanting one!!
Im waiting too.. pics of all the stuff !. Price tags too , that would be great hmm..
from the PDF of head CCs and comp ratios I have, EAB are 71cc and Cacm are 76cc so yeh go with the EABs. hey just saw you found it. ! you owe...
from my experience.. nope it wont work. itll run fine at idle , but on the road it will die with anything less than a 3/4 full tank. Ive put the...
Hey mart, I've done Torrington bearings on a few cars, I just cut a half inch wide ring out of a bicycle inner tube and slipped it over the race...
Nope, unfortunately neither of those things will be effective, the spring material is very hard and Even if you could ream it it would be...
2100 at 60 MPH , .78 overdrive 5th , 3.54 diff ,700x16 tyre.
Looking fantastic Jim! Going to be a beautiful rod . Proud to have played my part.
[ATTACH]heres some I shortened. They were forged. Tig welded with mild steel rod. No problemo. Posted using the Full Custom H.A.M.B. App!
I grind an internal groove in the cast material of the box where the column slips on, in two postiuons roughly 180 degrees apart, just enough to...
I made one recently. It's for the situation where you have a stock a model rear and torque tube already in the car and aren't replacing it. I...
Put it at the back under the bed where a passenger car one goes. That's what I'm doing. You'll have to either cut a door in the bed floor to fill...
the unfortunate truth is the best way to get a complete cab with doors is to buy the whole lot at once. Id sell what you bought ( at a profit...
The back panel can be just a 1/2" thick ply panel with inch or inch and a half thick foam , you really don't need much padding there as the seat...
youre gonna need a fuel pump. I tried to run a single 94 on a banger once, worked alright up to about 2000 rpm then ran out of fuel, and was worse...
should be fine thread 5/16. probably stripped one and tapped out to 18TPI.
Nice brackets and your welding is really neat! Always keen to see 32 truck threads as I'm halfway through mine. I'm glad my cabs a bit more solid...
I would think the chamfer faces down and the 'o'ring seals the stud to stop coolant seepage. If you seal the threads of the studs into the block...
Yup! Use it! It'll work fine as long as you shift slow and gentle.. Posted using the Full Custom H.A.M.B. App!
Sorry but that ain't a 39.. Probably 34 . Straight cut first/ reverse sliding gear and early type synchros. Not a fun box to use.. Posted using...
I don't fit the guide seals when I build a flathead, there is almost no oil getting between the guide and block, trust me. I've carefully...
Thanks for a great day out driving, Corey,(and Dave and Peddro!) it always amazes me how many roads and towns in central victoria there are that...
Perhaps in America it may be vaguely feasible to build a stroker using small journal rods- but from all my research you're actually ahead...
Id bet money your powervalves arent seating correctly and engine vacuum is pulling un metered fuel past the gasket on the powervalve. very common...
Find a set of prefect pedals. They are 2/3 scale replicas of the US ford ones and use the same 3/4" shaft. I recently used some in an AV8 and the...
Have you fit the grille shell over the radiator yet? I have a feeling a stock A radiator is too wide for a 32 grille..car or commercial ( same...
Clever work.. it all flows together nicely! I like the larger than normal grille opening, I find most track nose grilles look too small.. kinda...
End of an old torque tube, aluminium slug, lathe, bearing supply shop. The rest is common sense and basic use of a vernier caliper. Posted using...
Thanks big deuce , that is the part I have, starting to think no one makes the little piece I need. Maybe I should tool up and stamp them and sell...
Separate names with a comma.
The Jalopy Journal
