The Jalopy Journal
thx's redlinetoys,i was hoping for some optimism and i think u gave it to me . i'm glad it wasn't a metallic .
thanks for the responses, but what i sprayed was singlestage polyurethane that the gloss was reduced by 80%.Sorry for not being clear on that. i...
i need the help of some1 that can steer me in the right direction concerning paint polishing. i'm using a polyurethane topcoat that i flatened by...
did this to help lower engine compartment temperature [IMG]
higher compression,higher combustion tempertures,maybe have a look at your thermostat,antifreeze mixture,stuff like that.i would definetly change...
check out them there front tires for separation,could be the problem,but kingpins will do the same as well if worn,as for your spellling who...
i have to agree with modelcitizen,that screw u put in that line would be gonzo first application ,lol funny story though
Generator Polarizing when a generator has been disconnected and reinstalled,it must be polarized proir to starting the engine.When the generator...
[IMG]
thx's for the replies,i went and ordered 1. sad part is its 800 in the states and 1000 in canada plus gst=5%
i have wanted to buy a plazma cutter for some time and think i have found a interesting unit which includes a built in compressor,so COOL. has...
http://www.helicoil.in/ try these,never have this problem again if u use these inserts
i've done a ton of thm 350's and if u guys are just getting by with just a couple of c clamps that amazing. i've made most of the support tools u...
u must be refering to the steering knuckle , lower pivot bolt and threaded bushing upper pivot pin and threaded bushing is all the manuel calls...
forgot to say thats for all 49 to 52 pontiacs, the lower control arms are called, LOWER PIVOT PIN AND BUSHING
if u are talking the upper control arms,i have an manuel that calls those, UPPER PIVOT PIN AND ECCENTRIC BUSHINGS, hope this helps u out
worked for gm in those years and the 400 sb had problems with their heads.some1 mentioned steam holes in the heads,good thing to look at cause...
i repeat do the nozzle change,unless whats really bothering u is the compressor u own,cause i'm sure if u buy that brand new compressor ,u will...
we have an snap-on cabinet blaster at work and was having the same problem u describe,works good for a bit then slows down to nothing.the problem...
sounds like the trans governor is not operating correctly,u can do pressure checks with vehicle operating at specified speeds to check operation...
which maker is the trans? most have an vent usually on top of the case,check to see if that is open.overfilling could do the same thing.i have...
well u think that pointing to your wrist for the time is nothing unusual......try asking for washroom in mexico....i've had to point to my crouch...
i can remember back in the 60's that vw emblems were non existent because of the fact that they were also popular to the theives. i wonder if u...
one question,y would u run a square bore carb on a spread bore manifold?
i would love to fix up both hudsons,of course like i say ,they are not mine to make that call.the older hudson is missing the trunk lid and...
the 51 has the 308 cubic inch,but not the twin h setup for carbs.i still don't know which way my son in law will want to go with the...
the cars belong to my son in law .his father passed on last year and was the owner of these two vehicles.his last name is also hudson and maybe...
both the cars sat in the bush for bout 7 yrs.every1 thats responded feel that the roof line would be repairable. the older hudsons roof line is...
Separate names with a comma.
The Jalopy Journal
