The Jalopy Journal
let me try that url again for u so sorry http://www.secondchancegarage.com/public/186.cfm check out senario 6,its close to your readings u expressed
i think this is what ur looking for,hope it helps to understand ur readingshttp://www.secondchancegarage.com/public/186.cfm
ok,so we haul the cars out of the weeds,get them home and have a better look at them.one is a 51 for sure but i don't know if the other is a year...
Sklar8 and i picked up the cars and moved them to my place.this is the first real chance that i've had a close look at the bodies of both.My ? is...
thanks for the info.i really would like to save 1 of these cars.i can remember riding in my fathers hudson hornet when i was kid,
if you could get these cars, would u think it would be worth while to restore 1,heres some pics i took today.if any1 knows what year they might...
are u positively sure ur master is bleed?i know there is the old school method of bleeding the master where u remove it and plum the 2 lines to...
i doubt very much that it will fall apart in a few years like the newer ones u say.as far as the durability,u won't find too many fibreglass...
well igot it trimed to fit and reinforced the corners with 2 extra layers of woven fibreglass,i only used 2 layers on the rest of it so it remains...
got lots of pic's for the 49 stude c cab ,but the build style is not correct for here.only reason i posted partial pic's is because of the...
ok....cut liner mould in halve to compensate for the extra width.its important to leave some overhang of the insulation with out any glass applied...
lubucrod's insulation a little fibre glass cloth and resin [IMG] now i have a headliner after a few adjustments [IMG]
i'm not really sure bout all the mods that were done to the 59.the white stuff really doesn't suit the car or the grill,just my opinion.i owned 59...
here some more in the weeds,not the smokable kind either,rats. [IMG][IMG]
forgot to mention that it was the 4x 50 ft roll enought to do the truck twice over including underhood and door panels.i don't think mike needs to...
cost was bout 160 bucks including shipping to canada.and i must add the shipping was fast,got it before i was ready to install it.now thats what i...
yes.it is the closed cell type stuff.i'm amazed at the strenght of the composition of materials.i tryed to separate it by holding on to the silver...
bought some insulation from Harbour Supply from Mike [Lobucrod].got most of the cab done and would like to show how well it installs. thanks again...
usually if ur really involved with mechanical repairs, a dial torque wrench is normal used to check rotating torque{such has differential pinion...
u mentioned "engine turned panel" is this what ur lookin for?[IMG]
:phad a clutch disc stuck to flywheel,took awhile to free it up from flywheel using the engine.not sure bout the wd-40 trick but if u did a little...
Harbour Supply, bought insulation from mike and am very happy with the product so far. Too bad i wasn't a "H.A.M.B. member at the time ,i guess i...
i would like to know where u ran across these cool lookin batt boxes.do u have an url?
Separate names with a comma.
The Jalopy Journal
