The Jalopy Journal
All else being equal, there's only two ways to increase cooling: bigger radiator or more flow. Period. As to your overheating problem, generally...
Fill through the vent tube. Easy and you don't have to pull an axle.
You can attach pdf just like pictures Sent from my ADR6350 using H.A.M.B. mobile app
I've never seen the one on the left...appears to be a short-throw
Pretty easy to fabricate....
There kind of is...look in the tech archive and find Tech Weeks Past. When they're over, I try to collate zman's list of posts......
Timely inquiry. Over on Fordbarn there was a similar question: http://www.fordbarn.com/forum/showthread.php?t=128501 General consensus...
I think that was taken in Florida this morning! ;)
Early rods and floater bearings are a bitch to set up properly when you can find the right parts and someone who knows how. You're far better off...
Love the little Red Head heaters - I re-did one and updated it - it would burn you out of my little '36 Pickup cab in about five minutes...even on...
I'm not aware of an adapter, however, if you use a Ford-case T5, you should be able to adapt quite easily if using a stamped steel bellhousing....
I thought HRW did it. I explored this several years ago when looking for a traditionally styled rear for a Model-Y that would get a V8-60...
Doesn't Hot Rod Works in Nampa, ID do this?
Just read it (my dad get's R&C, I don't take any mags anymore) - good article. Wish I had been there....
I remember being told doors, fenders and trunk lids were acid dipped and some bumpers were aluminum. But that's old info from old timers.... ;)
A real loss for the community. RIP
Mike - I think Bob is right on this. There are plenty of folks, myself included, who are intrigued by your build. You and I have traded some...
I strongly recommend NOT using the 11" clutch/flywheel combo. It's SIGNIFICANTLY heavier than the car (10 & 9.5) applications. Will it work?...
You do not need to buy them in sets. I'm a big fan of going to a clutch rebuilder and just telling him what you need...they'll custom build...
Contact SNARL here on the HAMB. I think he has the thin spacer you need and he's a great source of info for swaps into Chevys. Some folks have...
I'm a fan of true CVRs for gauges. L7806 are good for a gauge and cost less than $0.15 each...simple.
Any decent welding shop can get quality welding cables in any gauge. I made some using 2/0 that would start a semi. For long runs (anything over...
I'm good, Paul! Gutted I missed Pendine - may have to make time for it next year on a trip over. Nothing for me car wise in a while - work has...
Subtract 25% for us Yanks, Paul! ;) Your Imperial Gallons are a wee bit larger than our colonial gallons. ;) Is there not some sort of...
Yep. Much better with the ATF - smoother, quicker shifts.
Again, gutted that I couldn't be there. May have to make the flight over for next year's event!!
It's not the housing so much as it is the filter. The paper filters are very, very restrictive. And due to the small size, getting good...
Separate names with a comma.
The Jalopy Journal
