The Jalopy Journal
I have a full set plus several extra pieces. Below is what they look like on a car. They need some work, but they are extremely rare and look...
This is a fully adjustable Peckat. This is a STAINLESS STEEL visor not aluminum. Needs to be cleaned and polished. These were made as an...
Great hood from Az. You can see the paint is baked off but the heat saved it from rust. Louvers are straight, handles are all there. Message me...
After much deliberation I have decided to sell my freshly restored E & Js. The link below is here on the HAMB and shows the full build thread....
I have a 3 deuce intake on a 292 and there is only one vac port in it. The PCV is plumbed into it and goes to the valley cover where the road...
Very hard to find 1935/1936 open car waterfall. Nice shape and when are you going to find another one for an open car ?[ATTACH] [ATTACH] [ATTACH]
Instead of buying a pair of 35/36 rear rods for $300.00 use some out of a 39 or 48 that are cheap and weld in a bung and mount these ends and...
Best 33 grille I've ever had but without a car it has to go. It has some silver paint on it but underneath it looks like the chrome is off and...
I am setting up a wet gauge for oil pressure and need to know if either of the ports in the picture (under masking tape) is more advantageous to...
I'll walk you through a complete rebuild of a set of E&J headlights from swap meet to ready to mount on the car. Yes, you either love or hate...
So I've had this tank kicking around for a few years and it is too small to take to Bonneville. Was planning making a go Kart for my son out of...
Here is the roof you need to fix yours. Not beautiful, but there is still a lot of usable stuff here. Open to reasonable offers [ATTACH][ATTACH]...
Decklid for a 1939-1940 Coupe. Corners and some of the edge were redone at a professional shop. One pic from shop shows the quality of the...
I'm hooking up an old SW wet oil pressure gauge to my 292 and need some info. Where is the best place to install the 1/8 line to go to the gauge?...
I've got a Y-Block going into my car with an Offy intake and 3 Stromberg 97s Where is the best place to hook up the vac. advance to the carb.?...
I looked at VanPelts and got a good diagram for different length clutch arms but nothing for pitman arms. I am looking for the longest arm that...
Here is a roof off a 1935-1936 3-window coupe; not all rusted out sheet metal is good. I will sell it as is or cut pieces for you. The full roof...
[IMG] Can anyone tell me what the triangular "drip trays" do? There were only 7 in my motor upon disassembly. Obviously I would need 8 for a...
[IMG] [IMG] 1. Everything went to the hot tank bagged and labeled but these came back with other MISC pieces that did not make it into the bag...
Started the build up on my wife's 312 today and the rebuild manual shows a counter weight to balance out the eccentric for the fuel pump. I went...
Had to buy this coupe to get parts for my project. What's left is for sale. Pass quarter, decklid surround, back window, roof parts......check...
I have 2 brand new Spindizzies books by Eric Zausner these are 17 x 12 coffee table books with 248 pages. They list on Amazon for $205 and up for...
This is a set of Stainless Steel Irons I got with my '36 body. The original owner had purchased these from Girtz (now Superior) and they are...
If you drive an early 30's Ford you know how hot it gets under the cowl, especially if you don't have a cowl vent. With a Duvall windshield you...
Filling a shell without bondo or expensive forming tools. If you look at many filled shells the peak comes out too flat or it is missing the...
This is the Super Rare ribbed visor (not the cross-hash). Nice shape but needs polish. Wing crossection mounts are on both ends and the center...
Our paint shop no longer makes custom tint spray cans. I have a good PPG paint number and some left over paint but mixing, cleaning, etc to just...
I was at Nats North today in Kalamazoo and Gearhead World had rails and a model A cross member for $450. They were in a crate so I could not...
I was talking with a friend yesterday at the Gilmore Car Museum and he suggested I post some of my work. The car is being built as a 1955-1958...
I am looking for a Stainless 3 spoke steering wheel (Bell Style). Anyone got one that they are happy with. Needs to be 15 inches. Thanks Z
Separate names with a comma.
The Jalopy Journal
