The Jalopy Journal
Here is an Ansen with the logo cast inverted[ATTACH]
Cool Thread. I’ve been around since 2007, how do you determine your number. I see a number of references to “I’m ###”
Here are two of mine, both original. [ATTACH] [ATTACH]
As mentioned, the cowl mirrors are terrible, the right one is totally unusable. The hinge pin model is decent, but getting the pins out on a...
Does anyone have a picture of where they mounted a Carter P4070 fuel pump in a 1932 Ford Frame. I’ve found a number of pictures for the...
Impressive,
/QUOTE]Tangent: Is there any source to obtain scans of all the FAST Issues? Not that I’m aware of. I had heard that there was an attempt at...
Who makes the extended shafts for the distributors? These are for engines with the Cragar or Riley Overhead valve set ups.
What would be a good compression reading for a Riley 2Port. I had looked at an engine that had 70-85 PSI, in # 1,2 & 4, and had 50 PSI in #3....
A Google search is best and add HAMB. I also do same search but add Fordbarn. Depending on the topic, Each forum will have good information.
Wow, Here’s to a quick recovery. I enjoy reading your posts and nuggets of wisdom that spark great conversations.
I registered mine in Texas with vintage plates. They required both and carefully compared them to the master book they had. Some TX Plates are...
I’ve been retired 5 years now. I’m out there just about every day for at least 4 hours or so. Multiple projects in play, some OT. I’m slowing...
Checking In!!!!
Folks this is great, keep the ideas coming. Here are some answers and what I have accomplished so far. I will re-accomplish everything today...
Cranks fine, rotates strong, also double checked distributor is installed correctly, as in not 180 out
I’m working on a new build that has a no spark condition. Before I start looking at the Rest of the system, wanted to make sure it’s wired...
Checking in
Folks, What location do you ground the block on your Bangers? My 12v system grounds are currently Batt to Frame, Trans to Frame and frame to...
Absolutely one of the best ever on the HAMB, Thank you!!!
Pate Swap Meet - Texas Motor Speedway 27-29 April 2023 Billed as the largest in the country and is a goldmine for vintage tin.
As mentioned, the LSR is the premier event this weekend, followed by the massive Pate Swap Meet 27-29 April @ Texas Motor Speedway.
Roll Call This has been a great meet over the last few years, I’ve seen a lot more treasures coming to light. If your setting up, what are you...
yes!!!! Thank You!!!
Does anyone have the directions to FAB the throttle Pivot Arm that is used with aftermarket manifolds. I have the Riley Downdraft aka Equalizer....
Folks, here is another plug for the F.A.S.T organization. These folks are attempting to keep the newsletter going along with a great way to keep...
Separate names with a comma.
The Jalopy Journal
