The Jalopy Journal
OK, been doing some searching and found the discussions about the dry flake gun, using a "cheap harbor freight" gun, and swapping tips on a...
OK - what' the general thought on this one - do I go with a torsion bar setup for the front end or just solid mount an axle to the front end? I'm...
Stolen from the C/T rules around here: CID limits are based upon .040 or .060 overbores depending on whose rules... so that means: 350 chevys...
All those shown are blown - are you going to open it up to blown engine dragsters then?? That would certainly up the ante on things......
Only if it's this one: [IMG] :p :p :p :p
I just cought this thread and I can say it's got me and another guy here at work stoked to build a digger - I've got "old junk" laying around for...
What DOC said about expired belts is good advice - I've got a 3 year old set that I won't be able to run this coming year, and a set that's 6...
Like this one? http://www.overtons.com/cgi-bin/overtons/detail/pdetail2.cgi?r=detail_view&item_num=35233 [IMG] $9 and comes with the cool...
This? [IMG] Here: http://www.speedwaymotors.com/xq/aspx/paging.yes/dept_id.706/display_id.2691/qx/Product.htm Look for the circle track...
I thought about slotting the brake shoe - like the newer design pads have the slots in them - slotting the shoe at an angle every 2" or so about...
Thanks guys - I'm going to buy that IR wrench. Think I'll spring the couple bucks for the protective "boot" for it too. I'm usually not too hard...
Do these seem to have more torque than a standard wrench? I've got an old (10yrs or so) Cambell-Hausfeld 'professional' version with (I think)...
After dealing with a bunch of frozen and rusty bolts on a rust-belt vehicle this past weekend I'm thinking I need to upgrade my impact wrench to...
All your questions answered here: http://help.yahoo.com/help/us/ysearch/slurp/ Note that in any good web site you should be using the "robot...
Where in KC - AirGas in independence or LinWeld should be able to repair or get it repaired. Their warranty says from date of MFG if no recipt -...
National Spring should be able to MAKE whatever you want. If I recall they're out of colorado - they do a lot of custom leaf springs for the rock...
I like the magical poppet in the first stage's cylinder - they don't show how that is operated. Also I would think they're overlooking the fuel...
I agree with the basic core swap for a generic replacement that will get by. For something a little more radical on the street - I've used kits...
The actual cam grinding - nope, but are you really wanting to know about how some of the guys advertising they do custom cams do it? (selecting...
From most of the conversions - Propane will take larger orafice "jets" and runs at a higher pressure than the CNG. The regulator on the unit is...
HA - if 'ya ever find the cure you'll make millions from all the "significant others" buying the cure! I know my wife would love it if I didn't...
http://www.racemate.com/ makes the alternator in a water pump pulley - [IMG] A little pricy from what I recall - Other ideas - the old...
I believe that scatter shields only need to cover 270* of the flywheel - basicly they can be open pointing to the ground (* at least the one on my...
Should have asked how ford got the distributor up front and chevy got it in the back - or did they just flip the engine 180* :cool: Obviously...
Thought I'd bump this to the top in case anybody forgot about it or didn't see it the first time around. To make this content car related - saw a...
A "trick" that local racers used on tired old engines running in the "hobby stock" or "cruiser" classes was to stuff the breather with brass...
Built a 4.3 for a friend's boat that used similar tricks to the one in the HotRod article - flat tops from a 350, performer intake, 600 CFM 4bbl,...
Separate names with a comma.
The Jalopy Journal
