The Jalopy Journal
best I have right now.
I have a 455 pontiac and a Munci in a 35 Chevy pickup. Made my own motor and trans mounts. Heres a pic of it going in after a rebuild. [ATTACH]
[ATTACH] I finally got the parts and did this job this morning. I took the tranny out, I don't think you could do this in the car. There is a pin...
Will do, going get the parts in my hand before I take it apart.
I've decided to do it in the car. If it doesn;t work out won't take much to remove the trans. Thanks for all your help. Paul
Is it possible to remove a munci tail shaft housing with the tranny in the car? Just bought a new speedometer for my 35 Chevy. But it doesn't work...
I use play sand from Lowes. $4.00 for 50 pounds and it is dry.
Home Depot has phosphoric acid for $20 a gallon
Heres mine 31 Vicky. Just picked it up.[ATTACH]
Damn Larry. You hit a home run on that one.
You got a good start there. Almost looks as thou you could drive it home.
I have a Pontiac in a 35 chevy. Made my own and used a typical rubber donut in the middle.
Alright, you guys just saved me a lot of work. Thanks
I am getting ready to paint bc cc and wondering about sanding the base coat before applying the clear? Or is that a waist of time ? And how fine...
Try stuffing steel wool between the baffles.
You need more than one person to hang around. They'll talk and while you work.
Even a blind Squirrel gets an occasional acorn. Break my balls if you must but I am welding again, with out holes.:p
FOUND THE PROBLEM. Those of you who suspected wire speed are correct. On my way to purchase a liner I decided to give the welder the once over,...
"Having the project is what makes me happy, finishing it isn't something I think about" This will keep you happy for a long time and you...
Great cause. Hope you get a good turn out.
I tried different wire, .024 with a .024 tip on a nice cleat piece of scrap. Seemed a little better but when I went to weld a door skin same old...
That was just an expression. I tried nice clean brand new metal and got the same results.
I bought the wire from same place, Matheson. I didn't pay much attention to it when I picked it up. I bought a new 2# spool from Hobart today...
.023 wire thats all I ever use. I am going to try another spool of fresh wire tommorrow. Let you know what happens.
Gas ran out before wire. Welded good with new gas, then ran out of wire. At first I thought it was the phosphoric acid we put on some of the metal...
I been moving the temp all over the place with no help. Bought the wire from the local Welding supply. I think it might be the wire also. Thanks...
I would say you guys got your shit together.
I just changed the wire and new bottle of gas on my Miller Matic 140. And now I am having trouble getting the weld to stick. Keep blowing through...
Nice work, what a transformation.
Lots of thinking going on there. Good to see younger guys enjoying this. And dig the tunes.
Separate names with a comma.
The Jalopy Journal
