The Jalopy Journal
Welcome Liz... Moving here to Bremerton, huh? It's not so bad... there's a few us with customs in town, but they're pretty few and far between....
Mine... [img]
Ryan, Here's just a couple suggestions I can add that seem to work well on my board. One's that have been already mentioned by others in one...
Here's my '54... [img]
Am I missing something?? Where and how did the "shoving and pushing VW down everyone's throats" come from?? Did one of them start a thread "Hey...
[ QUOTE ] Dude... there were WAY too many VW's there today...!!! "Those fuckin' dipshits think we think they're cool or some shit..." and "Why...
The '54 Merc... [img] And Das Panty Büncher... [img] [img]
Thanks low springs... I'll stop tearing what's left of my hair out, and give that a wirl tomorrow. I woulda never figured that out, and...
May come off as a dumb question, but... I'm in the middle of the re-wire job on my '54 Merc, and I'm at the stage where I'm doing the dash...
It's already been "partially" converted to 12V (just the basics). Has an old voltage-drop panel on the firewall for the remaining 6V accessories...
Well, I decided to swap out all the old brittle/bare wiring in the Merc with a new Painless harness. While I'm at it, I'd like to see about...
Happy birthday, Denise! Enjoy!
[ QUOTE ] My little brother's chop-top '60..........13 years in the making and FINALLY ON THE STREET AS OF THIS WEEKEND! [/ QUOTE ] [img]...
[ QUOTE ] It ain't the size of the head that counts anyway, it's the way you move it when you're listening to Twisted Sister. [/ QUOTE ]...
Made mine from a bunch of scrap wood I had laying around. It's a big heavy bastard (5/8" ply reinforced with 2x4s). 48" wide x 36" deep. If you...
Here's a link to the WA RCW stuff... WA State RCW Chapter 46.37
Donzie's accidently put "http" twice in his link... Try this: http://www.kustomsillustrated.com/
[ QUOTE ] Gets me thinking maybe we can post other useful specification websites you use regularly for what ever purpose. -Cheers [img] [/...
Quoted by Rob "caffeine": [ QUOTE ] you think YOU guys have it bad....try everytime I go home to my parents where I grew up i see the...
Read all the provisions they have for the older plates. Up here in WA, one of em is for "car club meetings". You just have lots of meetings...
Got a tip from a friend of mine, about some old car parts sitting out at the end of a driveway on the outskirts of town. Had to go check it out....
... [img]
Thanks for posting all those pics from my site (VolksRods.com), kustombuilder... saved me a bunch of time. [img] Most of the owners of those...
You guys are gonna hate this, but... Came across it a couple years ago being mentioned in a VW magazine from Great Britain... [img]
Here ya go...
Here's the link to Nads' thread when he metalflaked his bezels, Pook... Cheapo Packard tailight housing fix
You talkin' Sombreros? Roothawg did up a nice page showing his trick a while back that I saved. Here's the link:...
X-ray can find internal cracking (and surface cracking as well), but... it's most useful in finding porosity, inclusions, slag in welds, etc... as...
[ QUOTE ] No, that's only the second funniest. The best one was "I will kick your ass". The guy was auctioning off an ass whupping to the...
On most forums, the "view the results for this poll" button counts it the same as a vote submission if you hit it FIRST, then not allowing you to...
Separate names with a comma.
The Jalopy Journal
