The Jalopy Journal
Thank you for the help. I started by heating up the area and that made the rubber soft again. Then it moved a little easier and I’ve been taking...
Thank you guys, I’ll try all of the above, and give updates Sent from my iPhone using H.A.M.B.
I’m currently working on a 28 Ford open car and the rubber seal below the windshield has hardened like old plastic. When trying to remove it, it...
Have one pair left Sent from my iPhone using H.A.M.B.
Happy Thanksgiving! Not a whole lot to show progress pictures of. I️ think this was an Australian frame, just like the body. There was no...
Very cool roadster. I️t all goes together very well Sent from my iPhone using H.A.M.B.
[IMG] Got the new engine in yesterday and have to wire it up, also got the 32 axle on. Sent from my iPhone using The H.A.M.B. mobile app
I recently purchased a winfield SR-B downdraft carb setup. I’m pretty excited to get it going and put it on my A. I’m missing a choke assembly and...
I've been following this thread for a while and it's really coming along great! Thanks for the comment on my stanchions, they aren't hard to make,...
I wanted to have some folding windshield stanchions but the new ones are expensive, so I made my own. [IMG][IMG] [IMG] [IMG] [IMG] Here...
That is really cool! I like the footage toward the end, when they take a flight and taxi by 2 early model B-17's with the early tail, and a B-25...
Yes! Thank you! That's pretty cool Sent from my iPhone using The H.A.M.B. mobile app
Thanks for the coverage! I have to go to this event in the future. Does anyone have any pictures or info on the white roadster in the background...
I wish I could tell you I have amazing updates, but not much lately. I've been working a lot lately. And had today and yesterday off but it was...
Distributor is out. Still won't turn. Looks like I'm pulling the timing gear Sent from my iPhone using The H.A.M.B. mobile app
Finally got some more time to work on it. The head was really on there so I made a puller [IMG] I smashed the ceramic out of 2 model A spark...
I'm along for the ride. That's almost exactly where my model A head cracked Sent from my iPhone using The H.A.M.B. mobile app
Not yet, But I will have to. When I sit in it the steering wheel is in my lap and I can't lift my leg to operate the pedals. I'll have to maybe...
I love the stance! Keep going Sent from my iPhone using The H.A.M.B. mobile app
Thanks 37 kid. I have to find some first though. Anyone out there have any spares? Sent from my iPhone using The H.A.M.B. mobile app
I know. I thought the same thing about the new cars. Sent from my iPhone using The H.A.M.B. mobile app
[IMG] [IMG] [IMG] A few pictures. It's vice gripped together to figure out where I need to mount some panels. And I have it on this stock...
Update. I can get it to turn a little in one direction then it stops and gives a lot of resistance turning both clockwise and counterclockwise ....
Id agree. I wouldn't weld it in Sent from my iPhone using The H.A.M.B. mobile app
Bruce, thank you for the warning. That's exactly what I did. I left the distributor alone and planned on pulling the head and Distributor...
Thanks Charlie. I checked out the fordbarn and I looked at the distributor puller. I'll try again Sent from my iPhone using The H.A.M.B. mobile app
I have a cracked head on a 1928 Ford engine. and need to get it and the distributor off. The set screw on the passenger side isn't there, I have...
Last time I went in there, they were talking about moving to a different location down the street. Those guys have always been nice, but maybe the...
Nice to see you back at it with the tub. I'm working on one too. Sent from my iPhone using The H.A.M.B. mobile app
Separate names with a comma.
The Jalopy Journal
