The Jalopy Journal
My plan is to go with a Camaro t5
I'm not sure what bellhousing I have now, but I'd rather find a new one. The bottom bolts that the transmission bolts to are not threaded. They...
Okay cool, thanks.
Cool, thanks man!
Sorry to bother you, but do you know what T-5 I should look for if I wanted to run a speedometer, with a mechanical clutch and the factory clutch...
Thanks man, I appreciate that. Do you know what that bellhousing came out of?
I believe mine was out of a small car, not sure if they're any different from the ones out of impalas. I bought mine "rebuilt" off a guy ran it...
Nothings wrong, the Saginaws where made for smaller cars not full size trucks. Plus I was probably too hard on it. The Muncie is working out fine...
I believe I read somewhere that a guy used a mid 80s t5 out of a Camaro non WC and used a tail housing from an s10 t5 for better shifter position...
I have a 65 C10 pickup and I was considering a t5 transmission swap, but only if I could do it using a mechanical clutch. I've been through too...
Cool, thanks!
Haha, plus it's my daily driver.
I've taken some of the paint off the doors, a few spots have a small amount of body filler. Original paint underneath. I just wanted to get the...
I'm looking for a decent primer to use. I really don't want to use a black or grey primer. I have to strip all of the rattle can off that the...
[ATTACH]
[ATTACH] 64 chevy c10 sporting some chrome reverse
[ATTACH] saw these online somewhere, I believe they are 6x5.5 bolt pattern.
Are you going to make it out to the round up with this car?
How much if you don't mind me asking?
Thanks Jerry.
Alright finally figured it out! Thanks everyone! There was a bolt on the shifter that allows you to adjust how far the shifter can move forward or...
And I could get it to go into 3rd sometimes if I hit it hard enough.
It's not getting stuck in any gear because it rolls while in neutral. I have to go through the linkage again. Is there any way to adjust the...
Thanks for everyone's help I really appreciate it! Still trying to figure it out.
I'm thinking something's not right in the linkage or shifter. I adjusted the linkage once again 1st worked, now I can't get it to pop over for...
So I took my transmission to the shop, they said a snap ring broke and they fixed it. Installed the tranny last night, they didn't line up my...
I finally got my truck up and running and drove it two hours from my grandparents to my house with no problems. Supposedly the tranny was rebuild...
5-1/4'' by 46-1/2''
Separate names with a comma.
The Jalopy Journal
