The Jalopy Journal
Ron Butler 805 649 6000 May not be the one you want. He is the cobra guy and also buiids other cars.
Buy a good used 300 amp miller. I have seen them for $500 on cl. I welded for a living and I don't think you can end up with a quality weld with...
My wife fell in love with my sisters 1990 ford taurus. it was a greatcar to drive but then somemthing would break. Well now it is like a new...
Living in yhe moutains here we have used them for retaining walls where the ground was giving way similer to the house building post. After...
Over tourqing causes that sometime. I think 15ft pounds if its a u bolt type at the yoke.
Good luck.
Check the bushings on both sides of the linkage. if they are worn out it could hang up between 1st and second if you have a 3 speed or 2nd and...
66 for sure for 250. 230s were the early ones
Last ones were made in Brazil in 1992.
Great looking truck. Welcome
Try the national auto museum at Beaulieu palace house in the new forrest. Has several of the early LSR cars Blue Bird and seveal others also cars...
Not that bad here for in the family transfers. I've done it just small reg fee and new tags if they were due. I think it was $15 last time but...
Yeah, steel packs smitheys from the 50's
I was 24 on the family ranch in Paso Robles area. Had a 20 x 40 section of a 100x40 steel building for my cars. 1931 a coupe 51 henry j 50 olds...
Top loader ford from 68 mustang shoud take anything you can hit it wit
Yea $17 a week divided into $1700= 100 weeks. 2 years and you can get one.
Check the trans vacuum modulator.
Cletrac tractor with a loader running a 289 ford. One wild miniture track tractor. o
Nice yard art with no hood and open carb.
In 1953 my uncle gave me 2 plymoth coupes a 1933 and a1934. Both were perfect. Put a Chrysler spitfire 6 in the 33 and drove it.
Wire nuts are twisted not crimped.
dito
$1275.00 look under linclon v350-pro tig weld module. Art
You need the tig module. Look at it on the lincoln site for v350 pro. You can buy the same machine without leads for 2799 and free shipping but...
If the machine is ok You should be able to set it up ok but I would check with my lincoln dealer to see all that is needed to tig. Foot pedel etc....
Wire nuts are the most reliable but do leave that bulge. I use them and try and keep them out of eyesight.
Put a new one in. They are $20 and might save you a lot of problems.
NAOH will also react violently with aluminum and mixing with hot water makes it react quicker. They used it to boil out engines before the jet...
Hood hinge mouting holes may be different, at least that is what iv'e heard.
Liquid detergent and water rinse.
Separate names with a comma.
The Jalopy Journal
