The Jalopy Journal
Nice job, it looks great.Welcome
48-50s have a small back window. 51-52 have a wider back window.
Granger is selling miller 1wg23 migs for $796 normally $2600. What a deal.
South bay driveline on Julian in San Jose will do it for $125 and they ballance it. Measure from the end of the tailhouse case to the center oe...
Full face shields both clear and # 6 dark for torch work. Saves your eyes and head area and you can wear glasses under them. HOLD THOSE GRINDERS...
Make them with 2x4 rectanguler tube a 2 inch hole saw and a 4 1/2 inch angle grinder with a cut off wheel. If you dont have the tools a metal fab...
Wendnsday night 5pm to 9 at Scott and El Camino in Santa Clara next to boston market about a hundred cars. Sat morn Santa Cruz Capitola 41st ave...
Weld up a tank and then silver solder rivit heads to it if you just want the look. Tig welds are plenty strong without rivits.
The real deal. Perfecto!
To small of extention cord will burn your welder up. All tools Will burn up when under sized cords are used. I have no cords smaller then 12...
In the pits a radio on and advertising Marshal Sargents Last Lap restarant. On the track within 5 seconds Marshal goes into the wall, I never saw...
Go for it, Stock rears are weak in the housings.5 lug or 6 lug?
Ebay stores 2 inch or 3 inch $350 for front.
Your city or county building department. They are reasonable but vary in cost from city to city. A sketch of your garage with circuit placement...
Get a permit and keep your insurance valid. Run a sub panel circuit to the garage and have power for all of your tools. You can do the work...
Shouldn't do that.
Rack position (forward or back changes akerman) not tow in or out.
14/2 needs a 15 amp fuse. If you pull enough current to blow the fuse the 14/2 is going to act like a resister and the voltage will drop. You...
Pig tail hot and neutral and connect to LINE side of gfic. This will give you protection in your bath room with out effecting the other outlets if...
Wheels with 1 inch more backspacing gets you back in the game.
It is half right but the front was on a soild frame mount. c1 Corvettes had them on top of the axle.
I use componets finishing and spray technology who are both powder coaters if what im stripping is heavy enough to sand blast. Both are off...
The u shape the radiator mounts in is what is bolted to the mounts and the fenders bolt to that once the fenders and grill are assembled. Even as...
The mounts look very similer but only have two holes, the ouside ones and are rivoted on to the frame.
Mark 8 rear wheel drive.
1-Float level to high.2- Float leaks and is full of gas. Shake it and if it sounds like there is something inside, it may have gas in it.(brass...
Business degree will help you tons later on for what ever you do. Without it things are tough to come by. You can get burned out working on other...
A men
Could be berryllium. My spelling may be wrong also.
Separate names with a comma.
The Jalopy Journal
