The Jalopy Journal
Bronze bushing is best. They are durable where bearings may wear out or fail.
San Francisco bay area craigs list under cars type in 1923. There is a fair shot of the jag rear.
Try it yourself.
I wouln't bet on it.
Weld floor boards on my 59 truck. Pulled the dampner and front cover off my 327 to see why it didn't go on far enough for my belts to line up....
Korn binder's have strong frames. If it were me I would't add the weight to a already strong frame.
That is the right way.
They say size dosn't matter, but I say big.
How about wheels with deeper backset.
My dad's model t speedster with the rajo head and ruckstell rear axle. early hotrod 1933. Lot's of storys from going fast to hill climbing.
John Deere tractors used to be 2 cyl with heavy fly wheels. When they were under load they went putt putt and when it slacked up they went...
Did you gap the rings? It had to turn over while you were putting pistons in.
I had a 41 special 4 door with two 2's. Ran good.
Thats the best way and what I would do also.
How would a s 10 measure up.
More displacement= more hp and torque. Should go faster and get there sooner. I would try for a 261 or 302 gmc also.
I like it. Are you going to leave the sign on the door. I have never seen a alternator that looks like a stock generator.
5x41/2
Never hear of a 8.5 ford. A 8.8 has a taller, narrower rear cover then 7.5 and both are 10 bolt. I can't find anything with that part# either....
7.5 ranger rear axle looks like 8.8 and some part are the same. 8.8's were only in 4 litre ranger's and explorers as well as in mustangs and...
1948
Unless the rear is from a 4 liter ranger they are 7.8 and not real strong. Ok if you aren't putting to much power on it. Also one axel is...
Duelly hubs are wider then reg. 8lug 3/4 ton. If you change to reg it might work but you would still have to space the wheels out some. I may well...
His welder at full power only draws 17 amps. How ever a nice 50 amp breaker with a 6-3 wire and ground would make a nice setup to run a sub panel.
Old bedframes are spring steel and will not weld well.
A lincoln 175 has a total output of 3500 watts =220 volts just over 16 amps. 175 amps x 20 volts on the secondary.
Buy Made in America. As long as we buy forigen goods the dollar will stay on the decline. We have to sell as much as we buy.
Should be ok for voltage drop unless you already have a mile of wire from the breaker to the receptable. I run that much extetion for my tig. (50...
# 10 wire is correct for 30 amps as that is the wire size for the dryer circut. As long as you run a wire that is equal or larger then the breaker...
Use a pickup 1950 era trans with closed drive. Has the same bolt pattern as v8. Just don't abuse it. Not real strong. 55 to 57 car or pu bell...
Separate names with a comma.
The Jalopy Journal
