The Jalopy Journal
I found a complete 41 Merc motor thats been sitting for years n the ground, is the crank compatable with the 42-48 ford?
So, think I should box that Model T frame? I think you should find a second T frame & stack them together...... then box that!
Kepp us up to date with pic'a, what motor ya runnin, huh, hmmm,what was that,uhhh,shhh, ok I wont tell, well??????...
What the hell do you mean no warranty, I stated very clearly all the parts had a full 90/90 foot warranty, when you passed the end of the driveway...
Vaphead's fixen me up with the chassis engineering unit that abone31 spoke of, thanks all
Very cool man, wish my grandpa was still around to some of the old shit I ressurected, he would get a kick out of it, nice....................
The part that the trans is bolted to is the mount, it has rubber between that & the actual crossmember, speedway sells them new for $28, ones on...
I will be boxing the frame but it will be inset 1/2' so I dont think yours will work as I would have to make up the difference in width, thanks
Thanks, I pie cut above the master cyl, I am mounting the engine about 3"'s higher than normal, figure with a full fendered car it will fill the...
Thanks for all the replies but I was hoping to find a origonal appearing member, I will just fix mine if I cant find something that resembles...
I would like to get a new front crossmember, anybody steer me in the dierection of a new repro or 1 with some caster built in? Thanks
I had some time today to finally get the ball rolling on the A. Started with a F-1 crossmember & pedals but wanted the option of pulling the...
I picked up a flatty the other day, it says 59 on the back of the bellhousing & 59a-b on the heads, it has factory releiving between the valves &...
Heres a pic of my 31, it has a 4" drop front axle with stock front springs & 600-16's that rubbed the fender braces before I installed front...
OLDBEET has 1 if I remember correctly, see if you can round him up.
Well I have lived here on Orcas for 38 years & have no clue where Samish Island is but if anybody takes a cruise to Orcas look me up, Uzek @ Orcas...
Thanks OLDBEET now its all clear to me, so anybody fix me up with a flatty rad that will fit in the 31 A shell?
So are any of you guys connected with Mt Vernon radiator svse? I'm across the pond on Orcas Island & will need a rad for my 31 AV8 build.
Where were those pic's taken?
thanks, the tires are old Allstate exress 600 16, I think I am going to 5.50's on the front & 6.50 on the back if I can find a decent looking tire
I started putting my peices in place today, blasted the frame & started to see what it's going to take to make it all work together. It will...
bumpety bump
I'm thinking I can mount my fan in the standard generator location & mount the generator on the drivers side head with a speedway bracket, problem...
Makes my adrenaline run, how can that not put a smile on your face
Is the tank clean,maybe you have rust/debris plugging up the pickup tube, sounds like a fuel pressure gauge post fuel pump would tell you alot.
Hey Bill I have a stock T frame you can have, Uzek
Ok heres the scoop, I failed to mention the battery was dead so I was jump starting it with a jump box then disconnecting it when it was running,...
Your probably right about the grounding of the condensor, its mounted to the point plate but the plate has no ground strap from the plate to the...
He thought that the newer point set would be an upgrade from stock, newer must be better right, it does actually look like a pretty clean setup,...
Never had one fail with these symptoms, usually just find them shorted,I'll check it out in the morning, thanks
Separate names with a comma.
The Jalopy Journal
