The Jalopy Journal
Who let the dog's in? Muttley, looking for a solid one with no holes Sheepdog, have you seen 1 of Snyders visors? good quality? thanks
I need a new visor for my 31 model A coupe, anybody have any suggestions for good quality new one's?
Looks great, I like the way you mounted the rear axle, simple but effective.
Real nice Rolf, I hope to see it in person someday, thanks for all the updates, I look foreward to your progress as I am about 12 months behind...
[IMG] Heres my 31, 4" chop, 4" dropped axle & 3" dropped springs in the rear, havent done much lately exept collecting flathead V8 running gear...
Brent, what is the peice with the spade shape cutout for?
Yeah I'm into it about an hour so far & have found that old oak & metal bolts have a tendancy to fuse themselves together really well, windsheild,...
Going to replace the top wood & vinyl insert on the 31 A coupe soon, any pointers or just get out the chainsaw & go?
I had a long drawn out purchase from him also with lots of promises/sorry's/its in the mail's etc... months later & an e mail to Ryan he finally...
I heated & bent my pitman arm up so the drag link was paralell with the tie rod connecting sleeve, no bump steer, sent the pitman out for...
If you have a wire feed this is the poster child for a slick quick way out, take a nut with the same I.D. as the bkn,stripped bolt O.D., lay it up...
v/c from a Cortina? Or on second look maybe a Volvo 122 s, 60's vintage & thats my final answer!
Fred, do you know if Dave does his machining in house? I live close enough I have meant to stop by there quite a few times but seems like theres...
Anybody have any experience with machine shops in western Washington that know flatheads, how about regrinding a flathead cam/resurfacing johnson...
Pulled the heads today & found some minor pitting in the cylinders, quite a bit of rust on the exhaust valves & seats. I could not find any...
I picked up a 46-47 complete chassis that sat for 30 years or so out in the weather, the 59ab in it has a rebuild tag on it that reads .20 on the...
I'd pay at the most a grand, sell the motor (if it runs good) for $500, the trans for $100, the rear you'll probably get stuck with, the wheels...
Thanks for all the input, the 8ba fell through & sold to a fellow HAMBer, at least it went to a good home, so the 59ab it will be....................
I already have a 59ab rebuilder but have access to a 8ba runner, have a 39 trans/rear end & a 32 k member or 35 X member to use for a trans...
Is there any advantage to using a 1947 59ab over a1951 8ba in a AV8 build on an A chassis, overall lenth , mechanical fan options, parts...
Stude? Hope oldbeet doesnt live close by he's gotta be getting desperate for a stude motor by now.
I'd like to use the round head rivets similar to the factory ones holing the crossmembers in place from the factory, anybody know haw to get that...
34 pickup cab with a 31 A front end, looking for an old wrecker bed to finish her off. [IMG]
http://www.jalopyjournal.com/forum/showthread.php?t=36066&&showall=1
deleted
I have a 37 ford box in my 31 A, its set up as a cross steer with 40 spindles, the box mounts about a foot foreward of the stock location & gives...
Might be worth pulling the starter to see if the drive is still engaged with the flywheel, Iv'e seen drives stick in due to faulty...
Gitterdun!
I think ZMAN is right, I would check to see if all the rocker shaft bolts are the same, I think the 1 that goes onto the pedestal that the oil...
Great job on the coupe but your transportation methods give me the willys, is that coupe on top of your lumber rack? :-o
Separate names with a comma.
The Jalopy Journal
