The Jalopy Journal
you drill must be a piece of shit, it should turn it and build pressure.....but when it got hard to turn, is when it started to build pressure,...
in oklahoma you can file a title 42, which is a mechanics lien. i pay a lady $70.00 and she sends me the paper work. takes about a month
why would a mopar guy wanna sbc?
congrats you are now a member
your collapsed bag height is 3", so lower your buick to the lowest height you want it to sit, now make the distance from the upper cup to the...
inspect the head gasket you took off. you should be able to see where it was leaking, if it was leaking, just a thought to help you pinpoint the...
also dickster27 here on the HAMB has em
you sure you didn't just blow a head gasket? in that little amount of time i can't see it cracking anything. anyway good luck to ya!
is there any places you can go on the net to get factory color samples to look at? someone named tcpglobal.com but i could not get that site to...
isn't that JOHN DEERE paint, maybe try a DEERE dealer or service shop
i have a pipe bender and like others have said it kinks the tubing, its designed to bend pipe.. pipe is bigger diameter than tubing so the dies...
pm dickster27, he's a super nice fella. should have anything you need
you did have anti freeze in it right? those seals need lube
from what i gather welding 2 inches at a time is gonna cause warpage. you need to make small tacks very far apart and let cool before you tack again
i called coker to order cokers and they sold be bfgs instead, i'm not sure why but i am very happy with the bfgs
rashy, my dad ran across a name that does chrome in claremore, the other day. i doubt he is hamb friendly but he is close to you. his name is Joe...
make sure you bring enough shirts to the round up for everyone. it'll be the first thing i look for
damn thats funny LMAO....i can just picture going into my local auto zone and thinking this
crazy timing because i just shopvac'ed about 3 gallon of rat shit out of a chevy body about a hour ago. these turds were big suckers. i should...
i just go out to the shop. 1 you don't have to hear it 2 you get to work on your car
you sure do need education
one of my buddies was using my 4 1/2" grinder, and it snaged his shirt not once, but twice my friends, 2 times in about 3 or 4 minutes after that...
i would suggest putting it back on with an impact too......just run the nut all the way down by hand, then hit it with the impact for like 1...
its easier to use an impact, it will buzz right off.......
what do you guys use to clean the bare metal, before the primer?
it had this picture in it, no?
i always use a piece of 16 or 18 gage electrical wire with soapy water in a squirt bottle
you dont need a fork just smack it in the right place one time and it'll pop loose, ok maybe a couple times
no shit i was thinkin boat....hope its old schoool!
that video is pretty awsome eventhough i had to join metalmeet to see it....now i can't wait till i get to this part of my project!!
Separate names with a comma.
The Jalopy Journal
