The Jalopy Journal
A return line will be included
Wuga’s response came while I was typing my last comment so now i have 2 responses that at least attempt to answer the question. Thank you Mr....
Because for high altitude vapor lock issues I have found that a higher pressure from a pump installed right at the tank with a regulator as close...
I need to install a budget friendly fuel pump in my 28 RPU. There are several widely different types of pumps out there. I am looking for...
Uncle Max was who I dealt with in the past (I remember now that you put his name up.
I am looking for a source for Good Stromberg parts (specifically jets and power valves). I am working on a “new” Stromberg 48 and I have found...
Well unfortunately I was called out of town Friday night for a family emergency so this project is going to be on hold for a bit. Carbking, the 48...
Thank you Car, I had been thinking the same thing. This motor is in a (Fiberglass) 32 roadster “hot rod”that is just now being brought to life...
Sorry Guyz but i was not clear (and I’m not quite as dumb as you may think) the owner has ordered a Pertronix distributor not just a module (it...
I don’t disagree with you Andy but the owner has a brand new 48 and want’s to use it at least for now.
The motor does indeed have the L a M dist so we have a Pertronix on the way.
I was originally told that only the earliest Y blocks used a CCW distributor rotation but I don’t think that that is correct. I think that they...
I am familiar with that distributor and it is something else I am going to be dealing with (today is going to be my first opportunity to get my...
I am assisting a friend with setting up his 272 “Thunderbird” Y block (in a ‘32 roadster). At least temporarily we are going to be using a single...
PS, you may consider it “Greasy Lotion” at first but give it a couple days and it will dry really nice. If in the end you don’t like it you can...
Here’s what I do and the old guys at the tire shop are really impressed. (1) Give them a good scrubbing with Blue Dawn in hot water. (2) Apply...
Andy, yes, that looks like exactly what I need (if I could buy one ready to go I would). Awhile back when I kinda-sorta mocked up a system like...
All of the pictures, diagrams, and explanations were very helpful thanks to Y’all. It looks to me that if a builder wanted to stay with side steer...
I posted the box info immediately after my first post but for some reason it did not show up at that time. I am using what folks call a...
I am using an F100 box but that doesn’t change the steering linkage because the Pitman arm is in the stock location and orientation.
Probably a ridiculous question but just in case…….. is the (-) terminal of the coil going to the distributor?
I am in the process of building a ‘28 RPU and have questions about the steering linkage. No doubt thousands of hotrods have been built in the last...
So I’m installing a 4” drop axle on my Model A. After several days of working t find a suitable set up, I have come to the conclusion that it is...
There is a Burtz Block Facebook page, I strongly reccomend it
The Burtz camshaft is very good, definitely the way to go
I have a question, or series of questions that are very difficult to put into writing. For these question the best picture I can come up with is...
I have (4) Chrysler 15”x 6” 5 x 5 1/2” bolt pattern steel wheels (Motorwheel brand). They have been media blasted and Primered. I’m open to...
I read your prior post thru several times Dana but I just couldn’t quite get my head around your description combined with the photo. Now I get...
Dana, if I’m understanding you correctly you kept the rear crossmember in the original location and moved the axle itself forward about “? I am...
Got it Rich, thanks!
Separate names with a comma.
The Jalopy Journal
