The Jalopy Journal
I don't know what an exxy is, but sure. As for the "bung": the original adapter fittings were made of mild steel. This choice keeps us in...
When I think 1952 Buick, I think mechanical temp gauge? Does it have a capillary tube and thermo-well? The easiest scenario would be to replace...
STOP. The original 49' Mercury sending unit is a King Seeley thermal points actuated type. It looks like a little flying saucer. First and...
A note on the old Sun sender "buzz" boxes: they need to be completely gone through before installed. The original hard wired batteries need to be...
I don't think you'll find a cheaper solution, especially since you already own the gauge.
No. I can't speak on Autometer's or Drake's senders, or at least I shouldn't, but if you want to keep that gauge you'll have to find a way for...
John is a good guy and we've done alot together. I've never seen him build a temp sender though. Give it a shot and let us know.
Pardon the delay gentleman. It seems that after Hershey, everyone calls the "gauge guy". Unfortunately, there are no aftermarket sending units...
The mentioned information is mostly correct, depending on the model of gauge/sender the resistance direction/relation. I.E.: high resistance=...
Just word to the wise: your original mechanical speedometer is a far simpler component and far more robust than any electronic one you'll find. If...
Correct. The majority of tachometers are calibrated 2:1 (twice cable speed) to reduce internal wear. Crank drives are 0.50 and distributor drives...
What condition are you looking for? Used, NOS, restored, hole filler? Do you need the tank unit?
Agreed, you need a full disassembly. Please don't use WD-40 on a speedometer, we use highly specialized avionics greases and oils at various...
I think the black faced gauges previously discussed would fit the color scheme the best.
I like the Corvette idea, but the pairing is wrong for what Dreddybear has envisioned. The 57 vette gauges come in amp/oil, temp/fuel. Off the top...
Please explain what it is or is not doing and for what vehicle? The sender and gauge must be matched whatever you do. 1/2 NPT is the largest size...
Thank you. I'm just here to try and disseminate what I think I know, in case I get hit by a bus or something. What is your color scheme?
Sounds enigmatic. I am more concerned with the physical parameters: engine type, median oil pressure, cooling system pressure (boil over),...
Above statements are true. I haven't had a set of Eelco's in the shop for some time, pleasant to see some. We restore all types of gauge clusters...
A: They're for sale on a website with a shopping cart. B: The part number is straight out of SW's new catalog. C: The sweep doesn't start at 0...
Those appear to be post-61' gentlemen.
What's wrong with the original?
Small note, we can take the later SW 2 1/16 gauges and restore them as Wings. Is it technically correct? (Hmmms and haws)... no complaints as of...
Will you ever be charging the battery with 30 AMPS or greater? An ammeter tells you more than a volt meter: "you cannot have amperage without...
Good day gentlemen, I thought I heard my name. Mr. Taulbert, I had received your message and returned your call, please email:...
The 40 Ford gauges are not grounded, as previously stated they are King Seeley bi-metallic thermally actuated gauges modulated by points type...
Agree with previous post and you likely have the wrong senders.
If I'm not mistaken, that appears to be Stewart Warner 3 & 3/8 unit. Looking for a "Ford" adaptor might not be the best search. Just look for...
To build an appropriate magnetizer is cost prohibitive in comparison to just sending a speedometer in for service. It is worth noting that they do...
Hairspring tension has a greater affect at low speeds, magnetism at high speeds. I find strong magnetism and hairspring strength hold the pointer...
Separate names with a comma.
The Jalopy Journal
