The Jalopy Journal
[IMG]
Of course! [IMG]
So i recently aquired a 6-71 blower which has had slight machining on its case. I dont think itll self destruct any time soon, this is asthetics....
So for my 51, i want to install a Tilting and telescopic column and nice 60's steering wheel.,Ok so i do not want it to look hideous and modern...
I need dimensions, can anyone measure theirs?
Hi im about to buy a complete BB front end on ebay my intention is to use it as the basis for my hotrod. The seller has informed me that it...
Thanks guys I can work with that.
Thanks louvers, but I've spent many many hours searching and there isn't really any info on what comprises the many disk kits that are available....
I want to put disks on my shoebox and I'm trying to find the best disk and hub to start with and I'm happy to turn up spaces and sleeves.
I've since compared the stub axle on my hotrod to my 51 and noticed how the 51 stub is much shorter. So I believe that hub would be impossible to...
im interested in the shaft dia inside and outside, bearing spacing, offset from backing plate and dust seal dia. Not concerned about king pin...
I know there are plenty of disk break kits for Shoeboxes out there, they incorporate a hub and bearing as opposed to a slip over disk style. What...
Lytles, do you know the turn ratio on that box of yours?
Haha thanks DICK, i guess a few people here confused over my "fliping" i wanted to litteraly take the whole thing and turn it over, as you did,...
Hi, im looking at buying a second hand kse midget class power steer KSE box second hand. Its a left side drive, my question is can i flip it over...
Yeah, was he an amputee, i imagine it would still take some strength to haul that big ol wheel round. unless its got all mkii front end and stuff.
Hey, did you see if the chev pickup, with wheelchair on back, was setup with hand controls for disabled driver?
Heo2, sounds pretty typical wrecker to me haha, have a look for me please, see if its there. Matranga, cheers for the leads.
It is the power steer im after but our modification regulations most likely rule out a cavileer rack as ive seen how the US guys do it. Thanks...
Yeah mate the Hop was huge awesome time had. And cheers yeah the box is solid, cali car, not much rust at all 4 or 5 patches which is nothing. I...
Anyone got any more ideas?
Hi, I know this could technically be considered a wanted ad but its a bit more specific than that. Im trying to acquire a Volvo 164 p/s box for...
That's what I meant but hey, was a while since this thing came apart but still, will a valve spring do the job(the bolt running through?
Hi, the one bolt and spring that support the radiator and whole front guards and valence is mysteriously missing. Now I will replace it with an...
Thanks everybody, so much good info. First things first ill set the points at .019 give em a quick tickle and try again. Thanks bubba, the coil...
Ok thanks guys, ill look at the gap again and set it up but i will be getting bubbas help.
Yeah i know, but i just purchased this distributor from a reputable supplier and it has been "bench tested and setup" it SHould be perfect out...
Hi Ive installed a remanufactured and modified SBC points dizzy in my flathead and its giving a very weak spark and is missing intermittently,...
Ned, i believe they're a bit more like 8" at an estimate. Dale i guess Jounce is compression, hitting a bump etc. if talking numbers Im quote...
Hey EVERYBODY, great reading, i too use the screwdriver;) Im building a model A fenderless coupe, 49 spicer rearend. What i need to know is,...
Separate names with a comma.
The Jalopy Journal
