The Jalopy Journal
skin neck titty
Building this for a customer! He brought me a driveline, frame, firewall and dash. I had to build the rest. Speedsters rule!
Here is mine!
So I suppose it was on a Jadite plate?
Skin neck titty
In my day they were called necker knobs, and because it was meant to free your left arm to put it around your honey it had to be placed on the...
This was just a week ago at the Dover nostalgia drags @ Lebanon Valley NY
The finished product!
More pictures!
These pictures will show that it isn't as awful as everyone wants it to seem, I will post more pictures so that you can see the whole process
I know that this is the same weekend as the HAMB drags, but for us Hambsters on the right coast this should be a good substitue. The Dover...
To maintain the semigloss finish I would recomend wet sanding with 800 grit and the put 1 final coat. The orange peel comes from coat after coat....
Use a T5 out of an S10 Pickup. It is a 5 speed with the shifter forward thus it will clear the seat. I have one in my '32 behind a flathead, and...
No tickets are needed, they will be more than happy to take your money at the gate! PS My buddy Ron and I will be leaving Upstste New York Sunday...
A 6-71 can certainly be used on a flathead, but my thoughts are that is to large size wise to look correct. I have a 4-71 on my flathead (276 cu....
New York State has a web site that allows you to check and see if a plate (Vanity) is available. My buddy and I were fooling with it and came up...
The mystery has been solved! Garnet is alive and well, living in Palmerston. Spoke with him tonight, and he plans to arrive Schenectady this Tuesday!
Can't help but wonder if something ill befell him? btt
Slicker than snot on a doorknob!
Life is tough......but it's tougher if your stupid! Stay in school....finish....and then chase your passion. There is plenty of time for cars!
We build both Halibrand and Rodsville quickchange rears. The quality of Sigs (Rodsville) rear is exceptional! A lot of the time the assembly is...
I got mine right away, and couldn't wait to install them..... it was an easy install and they look great! Quality parts! Quality service. Thanks, Ron!
I'll take two sets!! They look Great, and will be the perfect bling for my chrome backing plates. PM sent.
Hey Brian, when we fabricate those dummy ends for nine inch axles we relieve the back a bit for the axle end protrusion. Regards, Ron & Dave at...
Here is a picture of the '40 Ford dash in my '32 roadster. I looked at a lot of pictures,and a lot of cars before deciding to do mine this way! [IMG]
If you search Hellzapoppin on the HAMB you can read some of the history and see more pictures.
Way to go Paul. Great article, and well desreving!
I do louvers, I am located in Schenectady and have done several '37 hoods. Attached is a picture of one I did recently. I can be reached @ 518 356...
The gaskets are in my shop, and I am not. If you can wait until tomorrow I will get you dimentions.
Send me your address, I have a gasket I can send you!
Separate names with a comma.
The Jalopy Journal
