The Jalopy Journal
I'll try both, the rubber seems to be on there perminantly. I'll try uncrimping the cable. Thanks, Mike
Yes Jim, the holes in the firewall are too small for the elbow to go through. The actual knob is forced fitted on and can't be removed!
Hello H.A.M.B. Does anyone know how to install the throttle and choke cables? I'm bringing my '46 Ford coupe back to a stock flathead. I have no...
Thx again Jim, After wrestling with them all morning I got the rear quarter windows in...
Jim, Should I wait til the headliner is in before I install the back window and windshield?
Yes, well the passenger side. Tomorrow's another day. thanks again Jim!
It's so much erasier when you use liquid soap DUH! Thanks for your help Jim...
Jim, I can't put top the hinge in without putting the bottom through the slot first...I think I'm missing something here?
Thanks for you fast response Jim. Do I need to screw in the hinge first?
Hello all, Does anyone have experience replacing the vent window seals on a '46 Ford? Does the seal go on first or the vent window? I remember...
Does anyone if there is a part # for a 1946 Ford front seat bolt to floor kit? Thanks, Mike
Necessity has always been the mother of invention, in your case the gamble paid off. Nice job!
Has anyone installed a '41 to 48 split windshield? Do I insert the windshield into the rubber seal first before attempting to install it from the...
Hello H.A.M.B, I am looking for the top left deck lid trim piece. For a ‘46 Ford super deluxe . Thanks, Mike. Istrum4u@cox.net
Can someone tell me how to connect the input hot water into the heater core on a 59AB? Am I to drill a hole in the heater input hose which goes to...
Hello all, After sitting for a few months I started my '46 and she's backfiring like crazy out of both tailpipes. New carb, 12 volt conversion,...
No, I said 3 half turns...
59 A-B Delco C45L
I set my Holley 94 three half turns both sides and still have heavy carbon build-up on plugs! Timing? hotter plug? Cooler plug?
Thx for the post, I chased the problem to a poor engine ground...Replaced it and she started right up!
Thx for the post, I chased it to a poor ground wire. replaced it and she started right up!
Thx for the post....When I took the battery out to charge it I must have pulled on the engine ground, you know the braided copper ground wire?...
Thanks for post, I chased it to a poor engine ground....Started right up! Funny how electrons must have a complete circuit to work.
thanks, chased it to a poor engine ground, started right up!
No vacuum leak, distributor locked....I chased it to a poor engine ground..Started right up!
I have a Mallory electronic ignition and have spark...
Can't get flatty to start. Tried everything...Getting spark and fuel. I did notice some accumulation of fuel on intake manifold. Test metered all...
Jeez, I thought I'd get a lot of responses to this post but all I got were corrections on my typing skills! Except for Hotrodprimer..
Sorry typo... Thx Hotrod!
Sorry, I meant to call you a bump...LOL
Separate names with a comma.
The Jalopy Journal
