The Jalopy Journal
And a Methanol engine can be a bi-ch to start some time's so you dump a cap full of gas in the carb and let it roll.
Give me a brake man sure you are going to have detonation on a T/F 8000 HP engine that is way they only last one run and have to be inspected!
You are right that is because the Nitro is hard to start on and does not burn as fast, so you can have high cylinder pressure with out...
Just up dated Racing Junk ad to $2000.00.
You tipacal only mix Nitromethane with Menthanol. Here is some good info to read on it. Nitromethane is a fuel that is used in racing,...
Is 1850.00 the total if so I will update the ad #1259815 on racing junk.
Bttt!!!!!!!!!!!!!!!!!!!!
The pitman is higher than the front attachment point so by putting the bend in the DL the rod end lay flater.
Man all this drag line bend no bend has me wondering if my is ok it drives ok. It has a little bump steer an old guy told me I need to put a pan...
top
I agree ^ some guys used that pipe for roll cages and would not even pass NHRA inspection. We have made tube chassis out of MS and CM tubing 1 5/8...
Bttt.
If there is any other photos you want on there pm them to and I will post them.
Check this out. http://www.chevyhiperformance.com/techarticles/148_0207_10_bolt_rearend_gear_install/index.html
Just posted it on Racing Junk Ad #1259815 and will keep my eye out for in TN.
On a 9" it is 65 to 85 ft-lbs I think that should be the same for any ring gear.
Good looking car does it really matter what mag it is, at least you got your ride in it. Cooool.
I just put in a True-Trac carrier in my 9" it uses gears instead of clutches, it Acts like a locker but is smooth like a clutch posi. No clanking...
You said your spring seats were enlarged so I am thinking that you need to check to see if the rocker arms has enough clearance between the spring...
I would but lost some wight and got off the blood press meds. But I will not give up my Beer, im cold beer man that sounds good:rolleyes:
I guess it is hard to get one looks like they are sold out all but sm sizes.
Alright so I am blind I need to get my eye looked at. Can't hear sh-t so I guess it is my eyes turn.
Were the heck do get a H.A.M.B shirt? Do you have to be an Alliance member or can you just buy them?:confused:
The upper hose I used a piece of stainless 1 1/2 OD PUT A 35 degree bend in it and two pieces of silicone hose 1 1/2 ID and 4 hose...
Thanks, Biscuit eater is hooking me up with two and I will call BG OR BLP and get the other two.
The cop ask do you now how fast you were going. Tommy boy we were flying like fast man. The cop 7, 7 mile hour. Tommy boy
Did I studder bitch. Captain Spaulding.
If you look at the front the board on my roof it is the full thickness and as you work back it is router thiner to make up for the uneven surface.
bump.
Went on there site and no luck.:confused:
Separate names with a comma.
The Jalopy Journal
